Bykski · B-CP-KIT SE

Custom water cooling kit for CPU and GPU builds

The Bykski B-CP-KIT SE provides the parts to build a custom water cooling loop for a CPU, a supported NVIDIA graphics card, or both. The GPU configurations include the N-TESLA-A100-40G-SR full-cover water block for cards such as the NVIDIA A100 40GB PCIe. Each configuration comes in soft-tube and rigid-tube versions with matching tube fittings.

Fits (GPU options)
NVIDIA A100 40GB PCIe and listed boards
Loop options
CPU, GPU, or both
Radiator sizes
240 mm or 360 mm
Tubing
Soft or rigid

Compatibility

The GPU water block in GPU240 and CG360 fits only the board layouts listed below.

  • ✓NVIDIA Tesla A100 40GB PCIe · Tesla A100 layout
  • ✓NVIDIA CMP 170HX 8GB · 170HX layout
  • ✓NVIDIA Tesla A30 24GB · Tesla A30 layout

Check your card’s PCB layout before ordering.

CPU240 and CG360 come in AMD and Intel versions. Before ordering, verify that the mounting hardware for your selected version supports your motherboard socket.

Check your case for a radiator mount and clearance for the selected 240 mm or 360 mm radiator.

Key Specifications

SeriesBykski B-CP-KIT SE
CPU240CPU cooling, 240 mm radiator
GPU240GPU cooling, 240 mm radiator
CG360CPU and GPU cooling, 360 mm radiator
Rigid-tube kitB-CPHT-KIT · Clear acrylic, 6 × 50 cm
Soft-tube kitB-CPADS-KIT · Clear flexible tubing, 2 × 1 m
CPU water blockCPU-XPR-C with ARGB in CPU240 and CG360
GPU water blockN-TESLA-A100-40G-SR in GPU240 and CG360

Bykski illustration of the soft-tube CPU240 configuration.

What's in the Box

1 × radiator1 × pump and reservoir assembly2 × ARGB fans (CPU240 or GPU240) or 3 × ARGB fans (CG360)1 × CPU water block (CPU240 or CG360)1 × full-cover GPU water block with 1 matching backplate and thermal pads (GPU240 or CG360)6 × 50 cm acrylic tubes (rigid) or 2 × 1 m clear tubes (soft)1 × bottle of coolant concentrate1 × ARGB controller1 × radiator bracket2 × reservoir mountsAnti-vibration pads (2 in CG360)

Rigid-tube fittings. CPU240 includes 6 tube fittings, 4 black 90° rotary elbows, and 2 plugs. GPU240 includes 6 tube fittings, 3 elbows, and 4 plugs. CG360 includes 8 tube fittings, 4 elbows, and 4 plugs.

Soft-tube fittings. CPU240 includes 6 tube fittings, 2 black 90° rotary elbows, and 2 plugs. GPU240 includes 6 tube fittings, 2 elbows, and 4 plugs. CG360 includes 8 tube fittings, 2 elbows, and 4 plugs.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system. Mount the radiator, fans, and pump and reservoir assembly.
2
Remove the existing cooler from each component you’ll connect to the loop. Apply your thermal paste and follow the block instructions for mounting and, on the GPU, pad placement.
3
Route the tubing and connect the radiator, pump and reservoir, and water blocks with the fittings for your tubing type.
4
Dilute the coolant concentrate as directed, then fill the loop, bleed trapped air, and leak-test with only the pump powered before starting the system.

FAQ

Can I cool the CPU and GPU in the same loop?

Yes. The CG360 configuration includes both water blocks and a 360 mm radiator.

Which versions include the N-TESLA-A100-40G-SR block?

GPU240 and CG360 include it in both tubing types. CPU240 includes the CPU water block.

Can I order the kit with soft tubing?

Yes. Choose Soft tube in the Tube selector for the B-CPADS-KIT version. It comes with two 1 m lengths of clear flexible tubing and matching fittings.

Notes
  • The illustration shows the soft-tube CPU240 setup. Check the box contents for your selected configuration.