Description
The Bykski B-FRD-TESLA-A100-80G is a full-cover all-in-one liquid cooler for supported NVIDIA A100 and A800 80GB PCIe cards. It replaces the passive heatsink and carries heat to a fan-cooled radiator through a preconnected loop with an inline pump. Choose the standard 360 mm unit for one card or the thick-radiator version for two.
Bykski lists these 80GB PCIe boards.
Confirm the model and compare your card’s PCB layout and mounting holes with Bykski’s diagram before ordering.
The pump sits in the braided tubing between the GPU block and the aluminum radiator. The standard 360 mm version uses three radiator fans.
The nickel-plated T2 copper base makes contact with the GPU and power circuitry through thermal interface materials. Coolant flows through 0.3 mm jet microchannels over the cold plate.
The 360H pairs two GPU blocks with one thick 360 mm radiator. Check the space for both cards and plan the tubing route before mounting the radiator.
| Model | Bykski B-FRD-TESLA-A100-80G |
|---|---|
| Standard 360 mm SKU | B-FRD-TESLA-A100-80G-360 |
| Thick 360 mm SKU | B-FRD-TESLA-A100-80G-360H |
| Cold plate | T2 copper with electroless nickel plating |
| Cold plate microchannels | 0.3 mm jet channels, up to 44 |
| Radiator | 360 mm class, aluminum, 12 coolant channels in the standard radiator design |
| Standard radiator length | 396 mm overall |
| Standard radiator thickness with fans | 52 mm |
| Standard 360 mm fans | 3 |
| GPU block drawing | 264.45 mm long, 35.54 mm thick as shown in the end view |
| Pump and tubing | Inline pump and braided tubing |
Check the card’s memory size and form factor first. Then choose whether you need the whole cooling assembly or a block for your own loop.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You will also need GPU thermal paste, the thermal pads specified for your kit, and a case with a compatible 360 mm radiator mount.
NVIDIA’s air-cooled A100 80GB PCIe uses a passive heatsink and relies on chassis airflow. The AIO replaces that heatsink and moves heat to its own fan-cooled radiator.
Check for a 360 mm radiator mount with room for 396 mm of overall length and 52 mm of depth with the fans installed. Leave space for the tubing to bend between the radiator and the card.
The AIO already has a pump in the tubing between the GPU block assembly and the radiator.
This cooler fits the 80GB PCIe layouts listed above. Choose a cooler designed for your SXM module if your GPU uses that form factor.
Inspect the tubing connections for moisture with the graphics card unpowered. Power the card only after the leak check passes.