G1/4 Soft Tube Barb Fitting for PC Water Cooling, 8 or 10 mm ID | Bykski B-TJ2 / B-TJ3

Bykski · B-TJ2 / B-TJ3

G1/4 barb fitting for soft tubing

The Bykski B-TJ2 and B-TJ3 are brass barb fittings that connect 8 mm or 10 mm ID soft tubing to a G1/4 port in a custom PC water cooling loop. The tubing slides over the barb. A hose clamp is recommended to hold it in place.

Fits
8 mm or 10 mm ID soft tubing
Port thread
G1/4 male
Body
Brass

Fits & Use With

Match the G1/4 port and check the inner diameter of your soft tubing.

  • ✓B-TJ2 fits 8 mm ID soft tubing.
  • ✓B-TJ3 fits 10 mm ID soft tubing.

Both fittings screw into a female G1/4 port. If you use a hose clamp, match it to the tubing’s outer diameter.

Design Highlights

B-TJ3 in the four available colors.

Straight hose barb

The hose slides over the stepped barb. If you use a clamp, it goes around the outside of the hose at the connection.

B-TJ2 viewed from the threaded end.

Knurled base and port seal

Hold the diamond-knurled base when threading the fitting into the port. The O-ring at the base seals against the port face.

Key Specifications

ModelsB-TJ2 / B-TJ3
Body materialBrass
Port connectionG1/4 male thread with O-ring
Tube connectionStraight hose barb
B-TJ2 soft tubing ID8 mm
B-TJ3 soft tubing ID10 mm
B-TJ2 colorsBlack, silver
B-TJ3 colorsBlack, silver, white, gold
Knurled base diameter18 mm on both models
B-TJ2 overall length25 mm

B-TJ2 fitting dimensions in millimeters.

Which Version Do I Need?

Bykski B-TJ2 / B-TJ3THIS PAGE
Choose 8 mm or 10 mm by the hose’s inner diameter. A separate hose clamp is recommended.
Choose the compression fitting to secure the hose with a threaded collar. Match both tube dimensions. B-FT3-TN-V2 fits 10 × 13 mm and B-FT3-TK-V2 fits 10 × 16 mm (ID × OD).

What's in the Box

1 × barb fitting in the selected size and color

A hose clamp is recommended and available separately.

Installation & Use

1
Disconnect power to the PC. Check that the O-ring is seated at the base of the fitting, then thread the fitting into the G1/4 port.
2
Cut the soft tubing square and push it over the barb. If you use a clamp, slide it onto the hose first and secure it over the connection according to the clamp maker’s directions.
3
Leak-test the loop before powering the computer hardware.

You’ll also need soft tubing of the matching inner diameter and a component with a female G1/4 port. A clamp sized to the tubing’s outer diameter is recommended.

FAQ

What does G1/4 refer to?

G1/4 is the size of the threaded connection to the water cooling component. Use the hose’s inner diameter to choose B-TJ2 or B-TJ3.

Which model fits 10 mm ID soft tubing?

Choose B-TJ3 for 10 mm ID soft tubing. The B-TJ2 fits 8 mm ID soft tubing.

Is this a quick-disconnect fitting?

The hose slides onto a fixed barb. A hose clamp that matches the hose’s outer diameter is recommended.

How many fittings come in the box?

Each unit includes one fitting in your selected size and color. A hose clamp is available separately.

Notes
  • Warning:This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.