D5 Pump with PWM and Optional CT60 Reservoir – Bykski B-UL-D5-X-V4

Bykski · B-UL-D5-X-V4

D5 pump for custom PC liquid cooling

The Bykski B-UL-D5-X-V4 is a PWM-controlled D5 pump that circulates coolant through a custom PC liquid cooling loop. Use the pump with a separate reservoir you already have, or select a CT60 tube reservoir that mounts directly to the pump head. The pump connects to the rest of the loop with G1/4 fittings.

Fits
G1/4 loop fittings
Max flow
720 L/h
Speed control
PWM with feedback
Rated supply
12 V DC

Fits & Reservoir Options

Choose a reservoir option under Water Tank Size.

  • ✓None — pump assembly for a loop with a separate reservoir
  • ✓CT60 combo — 60 mm reservoir
  • ✓CT60 combo — 100 mm reservoir
  • ✓CT60 combo — 150 mm reservoir
  • ✓CT60 combo — 200 mm reservoir

The size selector gives the nominal size of the reservoir with its top cap. The pump adds to the installed height. For a direct-mount reservoir, check for Bykski’s matching 60 mm thread.

CT60 reservoir sizes from left to right: 200, 150, 100, and 60 mm.

Design Highlights

POM pump head and aluminum housing

The POM pump head has a threaded seat for a matching tube reservoir. An aluminum alloy housing covers the motor.

PWM speed control with feedback

Adjust the D5 pump speed through a compatible motherboard PWM header or controller. A separate lead provides power, and the PWM lead also carries the pump’s speed feedback.

Key Specifications

ModelB-UL-D5-X-V4
Pump typeD5
ColorBlack
Pump headPOM
Motor housingAluminum alloy
Reservoir tubeClear acrylic (PMMA) on CT60 combos
Pump dimensions (H × W × D)79.40 × 69.00 × 69.00 mm
Pump portsG1/4
Maximum flow720 L/h
Rated power supply12 V DC
Input voltage range8–20 V DC
Rated input current1.85 A
Maximum input current2.0 A
Input power22 W
Power connector4-pin peripheral Molex
PWM signal1–100 kHz, 10–100% duty cycle
Coolant temperature0–70 °C
Ambient conditions−25 to 70 °C, under 90% RH
Pump protectionStall, overvoltage, and reverse polarity
Noise in Bykski’s testUp to 40 dBA measured 1 m horizontally from the pump, with background noise up to 20 dB

Bykski’s pump body drawing in millimeters. The G1/4 labels identify the side port and the center port on top.

Which Version Do I Need?

Bykski B-UL-D5-X-V4THIS PAGE
Choose the V4 pump on its own if you already have a separate reservoir, or select a CT60 combo for a reservoir mounted on the pump.
Choose this separate reservoir if you already have a compatible Bykski pump head with a 60 mm thread.
Check this listing if your build calls for the earlier V3 pump.

What's in the Box

All options: 1 × D5 pump assembly with POM head and aluminum housingCT60 combo only: 1 × tube reservoir with top cap in your selected size

Installation & Use

1
Choose a mounting point in your case with space for the pump, fittings, and tubing. Leave access above a directly mounted reservoir for filling.
2
Secure the pump and reservoir. Connect the pump to the loop using G1/4 fittings sized for your tubing.
3
Connect the 4-pin Molex plug to the power supply and the control lead to a compatible PWM header or controller. Leave power off while you fill.
4
Fill the reservoir so coolant reaches the pump before you switch it on. Power only the pump to bleed air and check the loop for leaks. Top up the reservoir as the level drops and keep coolant in the pump throughout.
5
Once you’ve checked each joint and confirmed the loop is leak-free, power the rest of the PC.

For a new loop, you also need a water block, radiator, G1/4 fittings, matching tubing, and coolant. Add a separate reservoir if you select the pump-only option.

Bykski’s connector diagram. 1 and 2 are the Molex power contacts. 3 is speed feedback. 4 is PWM control.

FAQ

Does the D5 pump come with a reservoir?

Choose None for the pump assembly without a reservoir, or select a 60, 100, 150, or 200 mm CT60 reservoir.

How big is the D5 pump body?

The pump is 79.40 mm tall with a 69.00 × 69.00 mm footprint. Allow additional space for your fittings and any reservoir you mount on top.

What is the pump’s maximum flow?

Bykski specifies a maximum flow of 720 L/h. Flow in an assembled loop depends on its restriction.

What happens if I leave the PWM signal lead disconnected?

With Molex power connected and the PWM signal lead unplugged, the pump defaults to full speed.

What coolant can I use?

Bykski lists ethylene glycol and propylene glycol as supported coolant types. Use a compatible PC loop coolant and keep its temperature within 0–70 °C.

Notes
  • Never run the pump dry. Coolant lubricates its moving parts.
  • Keep the pump out of direct sunlight and away from direct UV exposure.