Push-Lock Hose Quick Connector, Bykski CC-TJ-SR Stainless Steel Union

Bykski · CC-TJ-SR

Push-Lock hose connector with a threaded union

The Bykski CC-TJ-SR is a stainless steel hose fitting for custom liquid cooling loops. It connects compatible Push-Lock hose to a matching metric 24° cone adapter. The hose pushes onto the barb without a separate clamp, and the threaded union nut lets you separate the connection without pulling the hose off the barb.

Fits
Push-Lock hose
Mating connection
Metric 24° cone
Body
SUS304 stainless steel

Fits / Use With

Match both ends to the same row in Key Specifications.

  • ✓A male 24° cone adapter with the listed metric thread diameter and pitch
  • ✓Flexible Push-Lock hose with the listed nominal inside diameter

Two size options can share a hose ID and use different threads. Check the mating adapter before choosing.

Design Highlights

Assembly illustration. The exposed male thread at left is on the mating adapter.

Push the hose onto the barb

Match the hose's inside diameter to the barb for your chosen size. The Push-Lock connection holds compatible hose without a separate clamp.

Use the union nut to separate the joint

The hex nut threads onto the mating cone adapter. When you undo the nut, the hose can stay on the barb.

Key Specifications

ModelCC-TJ-SR
Body materialSUS304 stainless steel
ConnectionStraight. Female metric union for a 24° cone adapter to Push-Lock hose barb.
Size optionFemale thread · nominal hose ID
Fitting dimensions A and B in mm
82-6-4M12 × 1.5 · 6 mm / 1/4 in
A 40 mm · B 8.5 mm
82-8-4M14 × 1.5 · 6 mm / 1/4 in
A 36 mm · B 10 mm
82-10-6M16 × 1.5 · 10 mm / 3/8 in
A 40 mm · B 9 mm
82-12-6M18 × 1.5 · 10 mm / 3/8 in
A 40 mm · B 10 mm
82-15-8M22 × 1.5 · 12 mm / 1/2 in
A 40 mm · B 11 mm
82-18-10M26 × 1.5 · 16 mm / 5/8 in
A 44 mm · B 11 mm
82-22-12M30 × 2 · 20 mm / 3/4 in
A 58 mm · B 12.5 mm

Bykski dimension drawing. The long arrow (A) shows overall length. The short arrow (B) runs from the nut face to the shoulder.

Which Version Do I Need?

Bykski CC-TJ-SRTHIS PAGE
Choose this fitting to join Push-Lock hose to a matching metric cone adapter.
Choose this adapter when the connection calls for male threads on both ends.
Choose a shut-off coupling if you need the line to close as you disconnect it.
Choose this G1/4 valve for a drain point in your loop.

What's in the Box

Bykski CC-TJ-SR barbed union fitting in the selected sizeSeal included with every size

Installation & Use

1
Check the mating adapter's cone, thread diameter, and pitch against your selected size. Check the hose's inside diameter as well.
2
Cut the compatible hose square, clear any burrs, and push it fully onto the barb.
3
Align the union with the male cone adapter and tighten the union nut.
4
Check the assembled connections for leaks before putting the loop into service.

Have compatible Push-Lock hose and a matching male 24° cone adapter ready for installation.

Assembly illustration. The mating adapter is at left and the CC-TJ-SR fitting is at right.

FAQ

What makes this a hose quick connector?

The compatible hose pushes straight onto the barb without a separate clamp. The screw-on union nut connects the fitting to the cone adapter.

How do I disconnect the joint?

Shut down and drain the loop before loosening the union nut. Unscrew the nut from the mating adapter. The hose can stay on the barb.

How do I choose between 82-6-4 and 82-8-4?

Both list 6 mm or 1/4 in nominal hose ID. Choose 82-6-4 for M12 × 1.5 or 82-8-4 for M14 × 1.5.

What thread does the CC-TJ-SR use?

The union uses a metric female thread. Check the size table for the diameter and pitch of the option you select.

Notes
  • If a joint leaks during testing, stop the system and check that the fitting and seal are seated correctly.