Water Cooling Quick Connector, Bykski CC-UQD8-X Two-Way Shutoff, G1/2 to 5/8 in. ID Hose Barb

Bykski · CC-UQD8-X

Two-way shutoff for liquid cooling lines

The Bykski CC-UQD8-X is a quick connector for server and data center liquid cooling lines. It joins a G1/2 female port to 5/8 in. ID flexible tubing and gives you a service point where you can separate the line by hand. Both halves shut off automatically when separated.

Fits
G1/2 port and 5/8 in. ID hose
Housing
316L stainless steel
Coupled length
111.19 mm
Shutoff
Both sides

Fits / Use With

Match both ends of the coupling to your loop.

  • ✓G1/2 female port for the threaded male plug
  • ✓5/8 in. inside-diameter flexible tubing for the barbed female socket

Before ordering, check the port thread, the hose inside diameter, and the space around the socket for moving the sleeve.

Design Highlights

Straight-through flow

Coolant flows through the coupling when the plug and socket are locked together.

Sliding sleeve for hand release

The outer sleeve on the socket operates the lock. Use it to release the plug by hand. Each half closes as the coupling separates.

The horizontal axis shows flow in L/min. The vertical axis shows pressure drop in bar.

Pressure drop across the coupling

Bykski’s curve shows about 1.0 bar of pressure drop at 76 L/min.

Key Specifications

ModelCC-UQD8-X
Housing316L stainless steel
ColorSilver
Seal ringEPDM
Spring and ball materialStainless steel
Plug threadG1/2 male
Socket hose barb5/8 in. ID flexible tubing
Coupled length × max. diameter111.19 × 32.00 mm
Plug length × height59.90 × 29.50 mm
Socket length × diameter87.00 × 32.00 mm
Flow bore10 mm
Net weight277.5 g
Maximum working pressure20 bar
Maximum working flow76 L/min
Temperature range−40 to +120 °C
Storage temperature−40 to +150 °C
Fluids listed by BykskiEthylene glycol, purified water
Fluid loss per disconnect0.055 mL (manufacturer figure)
Durability5,000 connection cycles (manufacturer figure)

Top to bottom, the coupled unit, male plug and female socket. Dimensions are in millimeters.

Which Version Do I Need?

Choose by the connections on your loop.

Bykski CC-UQD8-XTHIS PAGE
Choose this model for a G1/2 female port and 5/8 in. ID flexible tubing.
Compare CC-UQD2-X for a G1/8 female port and 1/4 in. ID hose, CC-UQD6-X for 1/2 in. ID hose, or CC-UQD4D-X for two threaded ends. CC-UQD4-X is another thread-to-hose option. Check both connections before ordering.

What's in the Box

1 × CC-UQD8-X coupling with one male plug and one female socket

Installation & Use

1
Follow your system’s service procedure to isolate and depressurize the line.
2
Thread the male plug into the G1/2 female port. Seat the 5/8 in. ID hose on the socket’s hose barb.
3
Use the socket sleeve to connect the plug and socket, then check that they are locked together.
4
Leak-test the new connections before putting the loop back in service.
5
To separate the coupling for maintenance, follow the system’s isolation and depressurization procedure again, then use the socket sleeve to release the plug.

You’ll need a matching G1/2 female port and 5/8 in. ID flexible tubing.

FAQ

What thread and tubing does the CC-UQD8-X use?

The male plug uses a G1/2 external thread. The female socket has a barb for 5/8 in. ID flexible tubing.

Do both sides close when I disconnect it?

Yes. The plug and socket both shut off automatically when separated. Bykski lists 0.055 mL of fluid loss per disconnect.

Do I need tools to disconnect the two halves?

Once the fitting is installed, you can use the sleeve on the female socket to release the plug by hand.

How long is the assembly when connected?

The coupled assembly is 111.19 mm long, with a maximum outside diameter of 32.00 mm.

Notes
  • For system design, check the pressure drop at your intended flow, along with the specified coolant, temperature, and pressure limits for your loop.