100mm Radiator with Copper Core for Custom Loops – Bykski CR-RD640RC-TK100

$500.23 piece
items available
View Details
Bykski · CR-RD640RC-TK100

100 mm thick copper radiator for custom liquid cooling

The Bykski CR-RD640RC-TK100 is a 100 mm thick copper radiator that transfers heat from the coolant in a custom liquid cooling loop to the air. Coolant passes through five layers of channels, while air moves through the copper fins. There are two G1/4 ports beside the fins and two G1/2 ports on the end face.

Body thickness
100 mm
Fins
W-shaped copper
Coolant channels
20 in five layers
Fits
G1/4 and G1/2 fittings

Design Highlights

Manufacturer’s exploded illustration.

Five layers of coolant channels

The copper heat exchanger has 20 coolant channels arranged in five layers.

W-shaped copper fins

The fins transfer heat to the air. Bykski recommends high-static-pressure fans to move air through the core.

Ports on two faces

The G1/4 ports sit beside the fins on the broad face. The G1/2 ports face out from the end of the same tank. Match each fitting or plug to the thread at that position.

Key Specifications

ModelCR-RD640RC-TK100
Body thickness100 mm
Fins and coreRed copper
Coolant channels20 channels in five layers
Ports beside the fins2 × G1/4
End-facing ports2 × G1/2
ColorBlack

Which Version Do I Need?

Check the space available for the radiator, fans, and fittings before ordering.

Bykski CR-RD640RC-TK100THIS PAGE
Choose this model for a 100 mm thick radiator with both G1/4 and G1/2 connections. Check that your fan mounting holes align with the radiator before ordering.
Choose this 100 mm thick model for a row of four 120 mm fans.
Choose this 100 mm thick model for an array of nine 120 mm fans.

What's in the Box

Black CR-RD640RC-TK100 radiatorMounting screws

Installation & Use

1
Flush the radiator before adding it to the loop.
2
Check the mounting hole pattern and clearance for the radiator, fans, and fittings. Secure the radiator and fans with hardware that matches their mounts, using the included mounting screws where they fit.
3
Confirm the inlet and outlet positions before connecting the tubing. Use fittings and stop plugs that match the respective port threads.
4
Fill the loop and check for leaks before powering the system hardware.

To build the loop, have fans, a pump, tubing, fittings, stop plugs for any unused ports, and coolant.

FAQ

What does 100 mm measure?

It measures the thickness of the radiator body. Allow additional space for your fans, fittings, and tubing.

Which fittings match this radiator?

Use G1/4 fittings on the two ports beside the fins and G1/2 fittings on the two end-facing ports.

Should I flush the radiator before filling the loop?

Yes. Flush it before first use to clear any manufacturing residue that could discolor the coolant.

What affects how much heat the radiator can remove?

Bykski’s simulations vary fan airflow, coolant flow, and the difference between coolant inlet temperature and ambient air temperature. Heat rejection changes with those conditions.

Notes
  • Purchase note: In order to better use and maintain the radiator, please clean the radiator before use, *Please note that it is normal to have a small amount of impurities in the radiator, which are some welding process residues left during manufacturing, etc. *If cleaning is not performed, the first pouring of coolant may cause some color contamination