Bykski · CP-NWD5-V2-CT60
D5 pump and reservoir for custom PC water cooling
The Bykski CP-NWD5-V2-CT60 combines a D5 pump and a clear acrylic reservoir in one assembly for a custom PC water cooling loop. The pump circulates coolant, and the clear reservoir lets you see the coolant level. Choose from four reservoir tube lengths, each available with RBW lighting or without lighting.
Fits
Custom PC water cooling loops
Power and Lighting Compatibility
- ✓On the illustrated RBW model, the pump takes power from a 4-pin Molex connector. A separate PWM lead carries speed control and RPM feedback.
- ✓RBW lighting: a 5 V 3-pin ARGB motherboard header.
Not compatible:
- ✗12 V RGB headers for the RBW lighting lead.
Key Specifications
| Model | CP-NWD5-V2-CT60 |
|---|
| Pump type | D5 |
|---|
| Reservoir | Clear PMMA acrylic with black trim |
|---|
| Reservoir tube lengths | 60, 100, 150, or 200 mm |
|---|
| Maximum pump flow | 720 L/h |
|---|
| Maximum pump head | 4.5 m |
|---|
| Pump voltage | 12 V DC |
|---|
| Lighting | 5 V 3-pin ARGB (RBW) or unlit |
|---|
What's in the Box
1 × reservoir assembly with D5 pump installedReservoir mounting bracket5 V 3-pin ARGB motherboard adapter cable (RBW only)
Installation & Use
1Secure the pump and reservoir assembly to a mounting point in the case with suitable screws and the included reservoir mounting bracket.
2Connect the assembly to the cooling loop. On the illustrated RBW model, connect the 4-pin Molex lead to the power supply and the separate PWM lead to a PWM header.
3For the RBW version, use the included ARGB adapter cable to connect the lighting lead to a 5 V 3-pin ARGB motherboard header.
4Add coolant to the reservoir before starting the pump. Power only the pump to check for leaks and keep the other PC hardware off during the test.
To complete the loop, you’ll also need a water block, radiator, tubing, fittings, and coolant.
FAQ
Does the listed length include the pump?
The listed length is for the reservoir tube. Allow extra space for the assembled pump and reservoir.
Does the PWM header power the pump on the RBW model?
On the illustrated RBW model, the pump draws 12 V DC power through its 4-pin Molex lead. The separate PWM lead handles speed control and RPM feedback.
Can I order it without lighting?
Yes. Each reservoir tube length is available as an unlit version or with 5 V ARGB lighting (RBW).
Notes- Keep coolant in the reservoir whenever the pump is running.