Bykski · CPU-SP3-SR
CPU water block for AMD EPYC and Threadripper
The Bykski CPU-SP3-SR is a CPU water block for custom liquid cooling on platforms such as AMD EPYC SP3 servers. Its copper cold plate draws heat from the processor, and jet microchannels carry coolant across the plate. Two G1/4 ports connect the block to your loop.
Compatibility
Supported AMD CPU sockets
- ✓AMD EPYC — Socket SP3
- ✓AMD Ryzen Threadripper — Socket TR4
- ✓AMD EPYC — Socket SP6
Not compatible:
Before ordering, check your motherboard’s CPU socket and the space around its mounting points.
Design Highlights
Two top-mounted G1/4 ports
Connect the block to your custom loop with G1/4 fittings sized for your tubing.
Jet microchannels
Coolant passes between the fins in the copper cold plate, where it picks up heat from the processor.
Key Specifications
| Model | CPU-SP3-SR |
|---|
| Construction | Copper and brass |
|---|
| CPU contact plate | Copper |
|---|
| Port thread | 2 × G1/4 |
|---|
| Color | Black |
|---|
The flat cold plate faces the CPU.
Which Version Do I Need?
Use your motherboard’s socket to choose between the two block models.
Bykski CPU-SP3-SRTHIS PAGE
Choose this block for a custom loop on an SP3, TR4, or SP6 motherboard.
Choose this block for an AMD EPYC motherboard with Socket SP5.
What's in the Box
1 × CPU water blockMounting hardware
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Shut down and disconnect power. Remove the motherboard from the chassis and take off the existing CPU cooler.
2Clean the CPU lid and the block’s contact plate. Apply your own thermal paste evenly to the CPU lid.
3Align the block with your socket’s mounting points. Tighten the mounting screws gradually in the order marked on the block.
4Connect the block to the loop with G1/4 fittings. Check for leaks before powering the motherboard.
You also need a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Will this fit my EPYC motherboard?
Use this block if your AMD EPYC motherboard has Socket SP3 or SP6. For Socket SP5, choose the CPU-SP5-SR.
Can I use it on a Threadripper TR4 workstation?
Yes. Socket TR4 is listed for the CPU-SP3-SR. Check the socket in your motherboard specifications before ordering.
What fittings do I need?
Use G1/4 fittings for both ports. Match the fittings to the tubing in your loop.
What else do I need to cool the CPU?
Use the block with a pump, radiator, fittings, tubing, and coolant in a custom loop.
Notes- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.