Description
The Bykski CPU-XPR-DDC-I fits Intel LGA 115x and other listed sockets, and the CPU-XPR-DDC-M fits AMD AM4. Both combine a CPU water block, DDC pump, and reservoir to save mounting space in a compact custom loop. Connect the assembly to your radiator with G1/4 fittings.
Choose the version that matches your motherboard’s CPU socket.
Check clearance around and above the socket for the block, fittings, and tubing. Use a loop with no aluminum parts in contact with the coolant.
The DDC pump circulates coolant through the custom loop. The clear reservoir lets you see the coolant level while filling.
The copper plate sits against the CPU. Coolant flows through microchannels in the plate.
Both versions use 5V 3-pin ARGB, also called RBW. Use a matching 5V addressable header for the lighting cable.
| Models | CPU-XPR-DDC-I (Intel) CPU-XPR-DDC-M (AMD) |
|---|---|
| Cold plate | Nickel-plated copper |
| Reservoir | Clear acrylic (PMMA) |
| Port thread | G1/4 |
| Pump type | Integrated DDC |
| Pump power | 4-pin Molex, 12 V DC / 1.5 A |
| Pump speed control | Separate 4-pin PWM connector |
| Pump speed | 1,800–4,800 RPM |
| Pump head | 6 m |
| Pump flow | 700 L/h |
| Lighting | 5V 3-pin addressable RGB (RBW) |
| Intel dimensions | 95.4 × 92.20 mm footprint 75.97 mm tall |
| AMD dimensions | 113.74 mm across the mounting bracket 76.07 mm tall |
Use the socket list above to pick the mounting version. If you’re comparing pump-block combos, also check the reservoir material and lighting.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Complete the loop with a radiator, fans, tubing, G1/4 fittings sized for the tubing, and coolant.
Buy the G1/4 tubing fittings separately. Choose fittings that match your tubing type and diameter.
The DDC pump and reservoir are built into the block. You still need a radiator, fans, tubing, fittings, and coolant for the loop.
Choose the AMD CPU-XPR-DDC-M for an AM4 motherboard.
The 4-pin Molex lead supplies power. The separate 4-pin PWM connector controls pump speed.
Use a 5V 3-pin addressable RGB header for the RBW lighting.