Description
The Bykski CR-RD480RC-TK100 is a 100 mm thick radiator with a copper fin-and-tube core and mounts for four 120 mm fans. It transfers heat from the coolant in a custom PC loop to the air passing through the fins. The radiator body is 528.5 mm long, so measure the mounting space before ordering.
Check the fan layout, clearance, and port thread.
Measure your case or mounting bracket against the 528.5 × 122 × 100 mm body. Allow extra space for the fans, fittings, and tubing bends.
The port end extends past the four fan positions. Use the overall body length in the drawing to plan clearance around that end.
The core combines four layers of coolant channels with W-shaped copper fins. The folds increase the fin surface area exposed to the airflow.
| Model (SKU) | CR-RD480RC-TK100 |
|---|---|
| Series | RC Series |
| Size class | 480 mm |
| Body (L × W × T) | 528.5 × 122 × 100 mm |
| Fan positions | 4 × 120 mm in one row |
| Core material | Copper fins and tubes |
| Coolant channels | Four layers |
| Finish | Black |
Compare body thicknesses for the same 480 mm fan layout. Check the overall length and fitting thread on the version you choose.
For the loop, plan for 120 mm fans, fittings, matching tubing, a pump, a reservoir, water blocks, and coolant.
Check the mounting surface and the space around it against the 528.5 × 122 × 100 mm body. Leave additional clearance for the fan stack, fittings, and tubing.
Confirm the thread on the ports you plan to use before ordering fittings. Match the tubing side of each fitting to the tubing in your loop.
The 480 mm layout takes four 120 mm fans in a row.
Bykski’s installation guide specifies M3 × 28.3 mm screws for typical 25 mm thick fans. Choose the screw length to suit your fan if its thickness or mounting holes differ.