Custom Water Cooling Kit for CPU, GPU, or Both | Bykski B-ADS-KIT Soft Tube

Bykski · B-ADS-KIT

Custom Water Cooling Kit with Soft Tubing

The Bykski B-ADS-KIT is a soft-tube water cooling kit for building a custom loop in a desktop PC. Start by choosing which hardware you want to cool, then select the M or X configuration. Check your case’s radiator space and confirm the water block fits your hardware before ordering.

Tubing
Soft tube
Fits
CPU, GPU, or both
Configurations
M or X

Compatibility and Case Fit

  • ✓Dedicated CPU for a CPU-only loop. Check for a 240 mm radiator mount and verify CPU block compatibility using your motherboard socket.
  • ✓Dedicated graphics card for a GPU-only loop. Check for a 240 mm radiator mount and verify GPU block compatibility using your exact graphics card model and PCB revision.
  • ✓Graphics card + CPU for a loop with both blocks. Check for a 360 mm radiator mount and confirm both block matches.

Key Specifications

Kit seriesBykski B-ADS-KIT
Tubing typeSoft tubing
Available stylesM and X for each cooling option
CPU-only or GPU-only radiator240 mm with two 120 mm fans
CPU + GPU radiator360 mm with three 120 mm fans
Tubing and fittingsPVC tubing, for nominal 10 × 13 mm soft-tube fittings
Pump and reservoirPARX in M kits. D5 in X kits.

What's in the Box

CPU only (M and X) includes one CPU water block, one 240 mm radiator, two 120 mm fans, six soft-tube fittings, one 90° rotary elbow, and two pieces of PVC tubing.

GPU only (M and X) includes one GPU water block, one 240 mm radiator, two 120 mm fans, six soft-tube fittings, and two pieces of PVC tubing.

CPU + GPU (M and X) includes one CPU water block, one GPU water block, one 360 mm radiator, three 120 mm fans, eight soft-tube fittings, two 90° rotary elbows, and three pieces of PVC tubing.

Each kit with a GPU block includes one matching GPU backplate and thermal pads.

All kits include one pump and reservoir assembly, one vent valve, one radiator bracket, and one lighting controller.

Stop plugs are counted per kit. CPU only includes one in M and two in X. GPU only and CPU + GPU each include three in M and four in X.

For kits supplied with an acrylic-top full-cover gaming GPU block, the block comes with 2× G1/4 stop plugs.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Soft-Tube Loop Examples

CPU-only M loop illustration

GPU-only M loop illustration

Installation & Use

1
Check case clearance, then secure the radiator, fans, and pump and reservoir assembly.
2
Install the water block or blocks using their instructions. Apply thermal paste, and use the specified thermal pads where the GPU block requires them.
3
Route the soft tubing and secure it in the matching fittings.
4
Fill the loop and power only the pump while you check all joints for leaks. Power the rest of the PC after the leak test passes.

FAQ

What kind of tubing does this listing use?

All six configurations on this listing use soft tubing.

What changes between M and X?

M kits include a PARX pump and reservoir assembly, and X kits include a D5 pump and reservoir assembly. The radiator size stays the same between M and X for each cooling option. See What's in the Box for the parts included with your configuration.

Notes
  • The loop illustrations show example layouts. Check the parts list for the configuration you select.