D5 Pump with PWM Speed Control for PC Water Cooling | Bykski B-UL-D5-X-V3

€130.36 piece
items available
View Details
Bykski · B-UL-D5-X-V3

D5 pump with PWM speed control

The Bykski B-UL-D5-X-V3 is a D5 pump assembly that circulates coolant in a custom PC liquid cooling loop. It uses a CP-D5PB-V2 pump core with a maximum flow rate of 720 L/h and a maximum head of 4.5 m. The pump runs on 12 V DC and has a separate PWM lead for speed control.

Fits
G1/4 fittings
Body size
69 × 69 × 74.4 mm
Max flow
720 L/h
Max head
4.5 m

Fits & Connections

For custom PC liquid cooling loops.

  • ✓G1/4 fittings at the top inlet and side outlet
  • ✓A 4-pin Molex power connection and a motherboard PWM header for speed control

Choose fittings that match your tubing. Check the available mounting space with fittings and cables in place.

Design Highlights

Top inlet and side outlet

The POM pump top takes coolant through the upper port and sends it back into the loop through the side port. An aluminum alloy cover surrounds the motor.

Pump housing and clearance

The housing is 69 mm square at the base. Leave extra room above the pump for the inlet fitting and beside it for the outlet fitting and cable routing.

1–2 Power and ground · 3 Speed feedback · 4 PWM control

Separate power and speed control

The 4-pin Molex plug draws power from the PC power supply. The separate 4-pin PWM plug sends speed feedback and takes speed commands from a motherboard PWM header.

Key Specifications

ModelB-UL-D5-X-V3
Pump coreCP-D5PB-V2
Dimensions (W × D × H)69 × 69 × 74.4 mm
Port threadsG1/4
MaterialsPOM pump top, aluminum alloy housing
ColorBlack
Maximum flow rate720 L/h
Maximum head4.5 m
Rated voltage12 V DC
Input power22 W
Power connector4-pin Molex
Speed control4-pin PWM with speed feedback
Coolant temperature0–70 °C
Manufacturer-rated noise≤40 dBA at a horizontal distance of 1 m (background ≤20 dB)

Which Version Do I Need?

Bykski B-UL-D5-X-V3THIS PAGE
Choose this pump assembly if your loop already has a separate reservoir or you plan to source one separately.
Choose a CT60 combo option on the V4 page if you want a pump and tube reservoir together.

What's in the Box

1 × B-UL-D5-X-V3 pump assembly

The assembly contains the CP-D5PB-V2 pump core, POM pump top, and aluminum alloy housing.

Installation & Use

1
Choose a secure mounting position in the case. Check clearance for the pump body, fittings, tubing, and cables before fixing it in place.
2
Connect the reservoir feed to the top inlet with a G1/4 fitting. Route tubing from the side outlet into the rest of the loop.
3
Connect the 4-pin Molex plug to the power supply and the separate PWM plug to a motherboard PWM header.
4
Fill the reservoir and let coolant reach the pump before powering it. Bleed air and check for leaks with the rest of the PC unpowered. Keep the inlet supplied with coolant while the pump runs.

For the reservoir-fed setup described above, use a reservoir, G1/4 fittings, matching tubing, coolant, a radiator, and the water blocks for your loop.

Manufacturer illustration of a possible mounting position inside a PC case.

FAQ

What are the D5 pump dimensions?

The pump body is 69 mm wide, 69 mm deep, and 74.4 mm tall. Allow extra space for fittings and cables.

What are the maximum flow rate and head?

The pump is rated for up to 720 L/h of flow and a maximum head of 4.5 m.

How do I control pump speed?

Use the 4-pin PWM lead on a motherboard PWM header. The separate 4-pin Molex connector supplies power.

Is a pump top included?

Yes. The V3 is supplied as a complete pump assembly with its own POM pump top.

Where are the inlet and outlet?

The inlet is on top and the outlet is on the side. Both take G1/4 fittings.

Notes
  • Use PC liquid cooling coolant based on ethylene glycol or propylene glycol.
  • Never run the pump dry.