Description
The Bykski CP-NWD6-X-CT60 combines a D6 pump and a clear tube reservoir for a custom PC water cooling loop. The reservoir holds coolant and lets you see the fill level, while the PWM-controlled pump circulates coolant through the loop. Connect it with G1/4 fittings and choose a reservoir length that fits your build.
For custom PC liquid cooling loops.
Use a matching ARGB adapter for a motherboard connection. Do not connect the RBW lighting lead to a 12 V 4-pin RGB header.
The PMMA acrylic tube lets you check the coolant level while filling and bleeding the loop. The D6 pump uses a ceramic shaft and an aluminum alloy outer housing.
Each cover option comes in 60, 100, 150, and 200 mm reservoir lengths. Measure your available space for the complete pump and reservoir assembly, with extra room to reach the fill port.
Choose a black POM pump cover, a clear acrylic cover with RBW lighting, or a clear acrylic cover without lighting. The RBW option uses a separate 5 V 3-pin ARGB connection.
| Model | CP-NWD6-X-CT60 |
|---|---|
| Pump core | CP-D6PB-X brushless DC centrifugal pump |
| Reservoir tube | Clear PMMA acrylic |
| Pump cover | Clear acrylic or black POM |
| Pump housing diameter | 81 mm (black POM and 60/100 mm clear RBW) |
| Reservoir section lengths | 60 / 100 / 150 / 200 mm |
| Overall height, clear RBW | 147.7 mm (60 mm), 187.7 mm (100 mm) |
| Overall height, black POM | 136.7 / 176.7 / 226.7 / 276.7 mm, in order of reservoir length |
| Loop fitting thread | G1/4 |
| Maximum pump flow | 720 L/h |
| Pump speed | 1,800–4,800 RPM |
| Rated pump input | 12 V DC, 1.85 A, 22 W |
| Pump connections | 4-pin Molex power and separate PWM / tach lead |
| Lighting connection (RBW option) | 5 V 3-pin ARGB |
Check the model number when comparing Bykski pump and reservoir combinations.
To complete the loop, you’ll also need G1/4 fittings, matching tubing, a radiator, water block and coolant.
Bykski specifies 22 W of pump input power at 12 V DC and 1.85 A.
Pump power comes from the PSU’s 4-pin Molex peripheral connector. The separate PWM lead controls speed and carries the tach signal.
The 60, 100, 150, and 200 mm options describe the reservoir section. Include the pump housing when measuring your mounting space.
Choose RBW for 5 V 3-pin ARGB lighting. The clear unlit option comes without lighting.
Use G1/4 fittings that match the tubing in your custom loop.