Description
The Bykski CT-D5-180-X-V2 combines a D5 PWM pump and a 350 mL acrylic reservoir in one assembly. It circulates coolant in a custom PC water cooling loop with G1/4 fittings. The reservoir has a dedicated top fill port and clear windows so you can check the coolant level as you fill and bleed the loop.
Use in a loop without aluminum parts in contact with the coolant. Check case clearance for the assembly, fittings and access to the top fill port.
Connect the tubing from your loop to the top return inlet. Use the other top opening to add coolant or let air escape while filling.
The pump sits below the acrylic reservoir in a black housing. The aluminum exterior stays outside the coolant path.
The 4-pin Molex connector draws power from the PC power supply. The separate 4-pin PWM connector sends speed feedback and takes speed commands from a compatible header or controller.
| Model | CT-D5-180-X-V2 |
|---|---|
| Assembly | Black D5 PWM pump and reservoir |
| Reservoir | 350 mL clear acrylic (PMMA) |
| Housing materials | POM and aluminum alloy |
| Body (H × W × D) | 266.6 × 75 × 75 mm |
| With bracket (W × D) | 116 × 94 mm as shown |
| Return, fill and outlet thread | G1/4 |
| Rated pump voltage | 12 V DC |
| Pump connections | 4-pin Molex power and separate 4-pin PWM |
The D5 pump, aluminum pump housing and reservoir with top cap come assembled.
You also need G1/4 fittings, matching tubing, coolant, the water block or blocks for your hardware, a radiator and radiator fans.
The reservoir holds 350 mL.
Yes. Use a Bykski B-BKT-105 bracket and check your case clearance.
Use the separate fill port on the top cap. The other top port is the loop return inlet.
The 4-pin Molex connector supplies 12 V DC power. The separate 4-pin PWM connection is for speed control and feedback.