GPU Thermometer Terminal for Water Blocks, Bykski G1/4 Color LCD

Bykski

Digital coolant thermometer for GPU water blocks

This Bykski digital thermometer replaces the stock fitting terminal on a compatible Bykski GPU water block. Its built-in sensor reads the coolant temperature at the terminal, and the color LCD shows the reading in Celsius as the loop runs. The terminal accepts standard G1/4 fittings for connecting it to your cooling loop.

Fits
Select Bykski GPU water blocks
Display
Color LCD
Fittings
G1/4

Fits / Use With

Bykski lists these water block models among the compatible examples.

  • ✓N-RTX2080TI-X
  • ✓N-TESLA-P100-X
  • ✓N-RTX5000-X

Check the exact model of your water block and the clearance around its terminal before ordering.

Key Specifications

Part typeReplacement GPU water block terminal
DisplayColor LCD
ReadingReal-time coolant temperature in °C
Fitting threadG1/4
Material optionsClear acrylic or black POM

What's in the Box

1 × digital thermometer terminal module

Installation & Use

1
Remove the original terminal from the GPU water block.
2
Seat the sealing rings against the water block at the terminal joint.
3
Align the replacement terminal and secure it with the mounting screws.
4
Reconnect the loop with G1/4 fittings and leak-test the assembled loop.

Terminal Installation Examples

Installation example with a clear terminal.

Installation example with a black terminal.

FAQ

What temperature does this GPU thermometer show?

The LCD shows the temperature of the coolant passing through the terminal, in degrees Celsius.

How do I check whether it fits?

Use your Bykski water block’s exact model number and check the space around its terminal. Use G1/4 fittings to connect the tubing.

Notes
  • Bykski recommends leak-testing the loop for 24 hours after installation.