Bykski · RGV-AS-GR701-P
Acrylic distro plate for a GR701 custom loop
The Bykski RGV-AS-GR701-P is an acrylic distro plate made for custom liquid cooling in the ASUS ROG Hyperion GR701. Its built-in channels give the CPU block, GPU block, and radiators a central place to connect. Choose the plate with a pump or order it without one to use your own compatible pump.
Fits
ASUS ROG Hyperion GR701
Pump mount
One DDC / PMD3 position
Compatibility
Check your exact case model before ordering. Bykski's reference layout shows the plate next to the motherboard with CPU and single-GPU water blocks.
Bykski's GR701 routing diagram with an example CPU and single-GPU loop.
Design Highlights
Visible coolant channels
The clear acrylic shows the coolant paths through the plate. G1/4 ports give you connection points for the tubing runs to your water blocks and radiators.
Pump mount shown with the pump removed.
One pump mounts directly to the plate
The plate has a single mount for a compatible DDC pump, including Bykski PMD3 pumps of the supported design. If you plan to supply your own DDC pump, check its exact model before ordering.
Key Specifications
| Bykski model | RGV-AS-GR701-P |
|---|
| Plate material and finish | Clear acrylic (PMMA) |
|---|
| Acrylic covers | 8 mm upper cover, 10 mm lower cover |
|---|
| Rear mounting plate | Aluminum alloy |
|---|
| Plate dimensions (L × W × T) | 397.5 × 128 × 30.5 mm |
|---|
| Plate weight without pump | 1,020 g |
|---|
| Port thread | G1/4 |
|---|
| Pump mount | Single DDC / Bykski PMD3 mount |
|---|
| Order options | With pump or without pump |
|---|
Plate dimensions in millimeters. The drawing shows the plate before a pump is installed.
Which Version Do I Need?
Choose a plate if you are selecting your own loop parts, or pick a kit that includes water blocks and radiators.
Bykski RGV-AS-GR701-PTHIS PAGE
Choose the Bykski plate with a pump, or select the pump-free version if you already have a compatible DDC pump.
Choose this Granzon plate if you want the option of a pump with a digital display.
Choose this single-GPU kit for a panel, pump, radiators, and CPU and GPU blocks. Confirm your exact CPU and graphics card when ordering.
Choose the Barrow Aurora plate if you want a version with a manual lighting controller.
What's in the Box
1 × distro plateMounting screwsHex wrenchInstallation manual
The with-pump option includes one pump. A standalone lighting controller is sold separately.
Installation & Use
1If you chose the plate without a pump, fit a compatible DDC pump using the pump mounting instructions.
2Position the plate beside the motherboard. Fasten it using the screw positions shown on the rear aluminum mounting plate.
3Connect the water blocks and radiators with G1/4 fittings and matching tubing. If you have a CPU port adjustment module, use it as needed to align the CPU tube runs. Seal unused ports.
4Fill the loop and run only the pump to bleed air and check the joints for leaks. Keep the rest of the system powered off during the test.
For the pictured loop, source CPU and GPU water blocks, radiators and fans, G1/4 fittings, matching tubing, and coolant separately.
Manufacturer's diagram of the rear mounting plate and screw positions.
FAQ
Does the plate take two onboard pumps?
Bykski provides one onboard mounting position for a compatible DDC or PMD3 pump.
Can I order the plate without a pump?
Yes. Select the no-pump option if you already have a DDC pump that fits the plate's mount.
What fittings should I use?
Use G1/4 fittings at the plate. Choose fittings that match the size and type of tubing you plan to run.
What does a CPU port adjustment module do?
It helps line up the plate's CPU connections with the tubing runs to your CPU water block.
Notes- This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
- The with-pump option includes one pump. Other equipment shown in the detail photos is for illustration.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
If not notified in time, the Bykski's latest real object shall prevail.