ASUS ROG Z11 Distro Plate with DDC Pump and Cover | Bykski RGV-AS-Z11-P

Bykski · RGV-AS-Z11-P

A front-mounted distro plate for your ROG Z11 loop

The Bykski RGV-AS-Z11-P is a front-mounted distribution plate for custom liquid cooling in the ASUS ROG Z11 case. Channels in the clear acrylic plate route coolant between your water blocks and radiator. This configuration comes with a preinstalled DDC pump and heatsink cover, so the pump mounts directly to the plate.

Fits
ASUS ROG Z11
Ports
G1/4
Pump
DDC with heatsink cover
Lighting
5V 3-pin ARGB

Compatibility

This plate mounts at the front of the case.

  • ✓ASUS ROG Z11 case

The illustrated loop uses one GPU water block. Check your case model, then test-fit your chosen water blocks, radiator, and fittings before cutting tubing.

Bykski’s example build in the ASUS ROG Z11.

Design Highlights

Clear acrylic coolant channels

The CNC-machined channels are visible through the acrylic. The threaded ports give you connection points for tubing runs to your water blocks and radiator.

DDC pump mounted to the plate

The pump arrives installed under its finned heatsink cover. It draws power from a 4-pin Molex connector and uses a separate 4-pin PWM connection for speed control.

5V addressable lighting

The included ARGB strip lights the acrylic from the edge. Use the sync cable to connect it to a compatible 5V 3-pin ARGB header.

Key Specifications

Manufacturer modelRGV-AS-Z11-P
FormulaMod SKURGV-AS-Z11-P_DPC
Plate materialClear CNC-machined PMMA (acrylic)
Plate dimensions (L × W × T)360 × 113.50 × 31.50 mm
Port threadG1/4
PumpPreinstalled DDC with heatsink cover
Pump connections4-pin Molex power and 4-pin PWM control
Lighting5V 3-pin ARGB (Bykski RBW)

Bykski’s plate drawing in millimeters. Allow space for the pump and fittings during a test fit.

Which Version Do I Need?

Distro plate with DDC pumpTHIS PAGE
Choose this plate-and-pump assembly if you already have loop parts or want to select your own blocks, radiator, fittings, and tubing.
Choose the kit if you want the Z11 plate bundled with other loop hardware. Select the Intel or AMD kit option and confirm your GPU with FormulaMod.

What's in the Box

1 × RGV-AS-Z11-P distro plate1 × preinstalled DDC pump with heatsink cover5V ARGB LED stripARGB sync cableMounting hardware and hex wrenchAdjustment module

Installation & Use

1
Secure the distribution plate at the front of the ROG Z11 with the mounting hardware.
2
Test-fit your blocks and radiator. Plan the tubing runs and connect them using G1/4 fittings sized for your tubing.
3
Fill the loop and make sure coolant reaches the pump. Use the pump’s Molex lead to power it by itself while you check the fittings and joints for leaks.
4
After the leak test, switch off the pump. Connect its PWM lead and plug the lighting sync cable into a 5V 3-pin ARGB header, aligning the cable’s voltage pin with the header’s 5V pin.

You also need water blocks for the components you want to cool, a radiator and fans, G1/4 fittings, tubing, and coolant.

Bykski’s example tubing layout.

FAQ

Which case fits this Bykski distro plate?

Bykski lists the ASUS ROG Z11. The plate mounts at the front of that case.

Does this configuration include a pump?

Yes. A DDC pump with its heatsink cover comes installed on the plate.

How do I connect the lighting?

Use the included sync cable with a 5V 3-pin ARGB header. A 12V 4-pin RGB header is incompatible, and a standalone lighting controller is sold separately.

What fittings should I use?

Use G1/4 fittings. Choose the tubing side of each fitting to match your tubing.

How much space does the plate take up?

The plate drawing shows a length of 360 mm, a width of 113.50 mm, and a thickness of 31.50 mm. Allow extra clearance for the pump, fittings, and tubing.

Notes
  • This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc.. If not notified in time, the Bykski's latest real object shall prevail.