Bykski · RGV-CM-600M-P-V2
SL600M distro plate with a preinstalled DDC pump
The Bykski RGV-CM-600M-P-V2 is a distribution plate for a single-GPU custom cooling loop in the Cooler Master MasterCase SL600M. Its internal channels route coolant between the water blocks and radiator. This configuration comes with a preinstalled B-PMD3-COV pump and uses G1/4 fittings to connect to the rest of your loop.
Compatibility
- ✓Cooler Master MasterCase SL600M
Designed for a single-GPU custom loop. Check the exact case model before ordering.
Example build with the distro plate mounted vertically.
Key Specifications
| Plate model | RGV-CM-600M-P-V2 |
|---|
| Pump-equipped SKU | RGV-CM-600M-P-V2-DPC |
|---|
| Plate and backing | Acrylic with an aluminum mounting backplate |
|---|
| Plate dimensions | 348 × 127 × 36.5 mm (L × W × D, pump not shown) |
|---|
| Port thread | G1/4 |
|---|
| Preinstalled pump | Bykski B-PMD3-COV DDC with heat-dissipation cover |
|---|
Plate and Loop Details
Which Version Do I Need?
Distro plate with covered pumpTHIS PAGE
Choose this configuration if you are sourcing the rest of the loop separately.
Compare the matching kit if you are shopping for the rest of the loop as well.
What's in the Box
1 × distro plate1 × preinstalled B-PMD3-COV pump with coverMounting screws
The box contains no lighting controller.
Plate with the pump mounted.
Installation & Use
1Position the plate in the case and secure it with the screws threaded into the aluminum mounting backplate.
2Connect the water blocks and radiator to the plate with G1/4 fittings and tubing.
3If your plate has a lighting lead, use a motherboard header that matches the lead’s voltage and pin count. Use a matching adapter cable if needed.
4Fill the loop and leak-test it with only the pump powered before starting the PC.
To complete the loop, you also need water blocks, a radiator, G1/4 fittings, tubing, and coolant.
FAQ
Does this fit the Cooler Master SL600M?
Yes. The distro plate is designed for the Cooler Master MasterCase SL600M in a single-GPU custom loop.
Is the pump already installed?
Yes. This configuration comes with the Bykski B-PMD3-COV DDC pump and its cover mounted on the plate.
How do I check lighting compatibility before ordering?
Confirm whether the plate has a lighting lead. If it does, check its voltage and pin count against your motherboard’s lighting headers.
Notes- The distro plate and preinstalled pump are included. Other loop components and cases shown in the example photos are for illustration.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc.,
If not notified in time, the Bykski's latest real object shall prevail