Cooler Master SL600M Distro Plate with DDC Pump, Bykski RGV-CM-600M-P-V2

Bykski · RGV-CM-600M-P-V2

SL600M distro plate with a preinstalled DDC pump

The Bykski RGV-CM-600M-P-V2 is a distribution plate for a single-GPU custom cooling loop in the Cooler Master MasterCase SL600M. Its internal channels route coolant between the water blocks and radiator. This configuration comes with a preinstalled B-PMD3-COV pump and uses G1/4 fittings to connect to the rest of your loop.

Fits
MasterCase SL600M
Loop layout
Single GPU
Port thread
G1/4

Compatibility

  • ✓Cooler Master MasterCase SL600M

Designed for a single-GPU custom loop. Check the exact case model before ordering.

Example build with the distro plate mounted vertically.

Key Specifications

Plate modelRGV-CM-600M-P-V2
Pump-equipped SKURGV-CM-600M-P-V2-DPC
Plate and backingAcrylic with an aluminum mounting backplate
Plate dimensions348 × 127 × 36.5 mm (L × W × D, pump not shown)
Port threadG1/4
Preinstalled pumpBykski B-PMD3-COV DDC with heat-dissipation cover

Plate and Loop Details

Which Version Do I Need?

Distro plate with covered pumpTHIS PAGE
Choose this configuration if you are sourcing the rest of the loop separately.
Compare the matching kit if you are shopping for the rest of the loop as well.

What's in the Box

1 × distro plate1 × preinstalled B-PMD3-COV pump with coverMounting screws

The box contains no lighting controller.

Plate with the pump mounted.

Installation & Use

1
Position the plate in the case and secure it with the screws threaded into the aluminum mounting backplate.
2
Connect the water blocks and radiator to the plate with G1/4 fittings and tubing.
3
If your plate has a lighting lead, use a motherboard header that matches the lead’s voltage and pin count. Use a matching adapter cable if needed.
4
Fill the loop and leak-test it with only the pump powered before starting the PC.

To complete the loop, you also need water blocks, a radiator, G1/4 fittings, tubing, and coolant.

FAQ

Does this fit the Cooler Master SL600M?

Yes. The distro plate is designed for the Cooler Master MasterCase SL600M in a single-GPU custom loop.

Is the pump already installed?

Yes. This configuration comes with the Bykski B-PMD3-COV DDC pump and its cover mounted on the plate.

How do I check lighting compatibility before ordering?

Confirm whether the plate has a lighting lead. If it does, check its voltage and pin count against your motherboard’s lighting headers.

Notes
  • The distro plate and preinstalled pump are included. Other loop components and cases shown in the example photos are for illustration.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc., If not notified in time, the Bykski's latest real object shall prevail