Bykski · RGV-COS-5000D-P
Acrylic distro plate for the Corsair 5000D
The Bykski RGV-COS-5000D-P is a clear acrylic distro plate for a custom water-cooling loop in the Corsair 5000D. Its built-in reservoir and coolant channels bring the tubing from your CPU block, GPU block, and radiator to one place. The plate ships with 5 V addressable lighting and has a direct mount for a compatible DDC pump. The pump is sold separately.
Pump mount
DDC · pump sold separately
Compatibility
Bykski specifies this case for the plate.
Check the full model name on your case before ordering. Measure the clearance for your radiator and fans with the plate in place.
Design Highlights
Reservoir and coolant channels in one plate
The clear acrylic lets you see the coolant level in the reservoir. Internal channels carry coolant between connections on the plate, leaving the external tubing runs for your water blocks and radiator.
Port map for planning your loop
In Bykski’s front view, 1–2 mark the radiator connections, 3 the fill and vent port, 4–5 the CPU block connections, 6–7 the GPU block connections, 8 the adjustment module mounting points, and 9 the drain.
Key Specifications
| Model (SKU) | RGV-COS-5000D-P |
|---|
| Case | Corsair 5000D |
|---|
| Plate material | Clear PMMA (acrylic) |
|---|
| Plate dimensions (L × W × T) | 353 × 123 × 30.5 mm without pump |
|---|
| Port thread | G1/4 |
|---|
| Pump mount | DDC |
|---|
| Lighting | 5 V 3-pin ARGB (Bykski RBW) |
|---|
Manufacturer drawing. Dimensions are in millimeters.
Which Version Do I Need?
Bykski RGV-COS-5000D-PTHIS PAGE
Choose the standalone plate if you already have or want to select your own DDC pump, radiator, blocks, and tubing.
Choose the single-GPU loop kit if you also need a DDC pump, radiator, and water blocks. Provide your exact CPU and graphics card models so the blocks can be matched.
What's in the Box
1 × acrylic distro plate with 5 V ARGB lightingMounting hardware and hex keyAdjustment moduleARGB sync cable
The DDC pump and lighting controller are sold separately.
Installation & Use
1Confirm your case model and test-fit the plate, radiator, and fans to check clearance. If you plan to use the recessed DDC mount, check the exact pump model before ordering and use the seal and mounting hardware specified for your pump.
2Seat the pump’s seal and fasten the compatible DDC pump to the plate following the pump mounting instructions.
3Position the plate to the right of the motherboard. Secure it from behind the case tray using the plate’s rear aluminum mounting plate and supplied mounting screws.
4Follow the port map to connect the blocks and radiator. Use the adjustment module if the CPU tubing needs to move up or down to line up. Match tubing outside diameter to your G1/4 fittings, deburr the cut ends, and plug unused coolant ports.
5Use the sync cable to connect the lighting to a 5 V 3-pin ARGB header. Keep it off 12 V 4-pin RGB headers.
6Fill with PC loop coolant and keep alcohol away from the acrylic. Keep the pump supplied with coolant while filling and testing. Power only the pump while you check the fittings and seals for leaks.
You also need a Corsair 5000D case, a radiator and fans, water blocks for your hardware, G1/4 fittings and stop plugs, matching tubing, and PC loop coolant. For the direct mount, use a compatible DDC pump sold separately.
Manufacturer drawing of the plate and case mounting points.
FAQ
Will this distro plate fit my case?
Bykski lists the Corsair 5000D. Check your full case model before ordering.
Does the plate include a pump?
This version ships without a pump. Choose a compatible DDC pump for the direct mount.
Do I need a separate reservoir?
The plate has its own reservoir chamber for the coolant.
What fittings and tubing do I need?
Use G1/4 hard-tube fittings and tubing with the outside diameter specified by those fittings.
Where do I connect the ARGB lighting?
Use the sync cable to connect to a 5 V 3-pin ARGB header. A 12 V 4-pin RGB header is incompatible.
Notes- This distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.
- All pumps, radiators, reservoirs, cases, fittings and other products in details photos are for reference only.
- As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
- If not notified in time, the Bykski's latest real object shall prevail.