Lian Li O11 Dynamic EVO Distro Plate, Side Mount - Bykski RGV-LAN-O11-EVO-P

Bykski · RGV-LAN-O11-EVO-P

Side-Mount Distro Plate for the Lian Li O11 Dynamic EVO

The Bykski RGV-LAN-O11-EVO-P is a side-mount distro plate for custom water cooling in the Lian Li O11 Dynamic EVO. Its clear acrylic body combines a coolant reservoir and machined channels to route coolant between the water blocks and radiators. Choose a preinstalled DDC pump with a heatsink cover or the plate with an empty DDC mount.

Fits
Lian Li O11 Dynamic EVO
Port Thread
G1/4
Pump Mount
DDC
Lighting
5V 3-pin ARGB

Compatibility

Check the exact model printed on your case before ordering.

  • ✓Lian Li O11 Dynamic EVO (O11D EVO)

Not compatible:

  • ✗Other Lian Li O11 case models

This version mounts beside the motherboard on the side bracket. Check radiator and fan clearance with your planned fittings and tubing.

Bykski’s routing example with a CPU block, one GPU block, and top and bottom radiators.

Design Highlights

Reservoir and Coolant Channels in One Plate

The large clear chamber holds coolant and lets you see the fill level. The smaller machined channels give the CPU and GPU water blocks and radiators fixed points to connect to.

Direct-Mount DDC Pump

The pump sits directly on the plate. Choose the pump option for a preinstalled DDC with a finned heatsink cover, or choose No Pump if you plan to install a compatible DDC separately.

5V Addressable Lighting

The ARGB strip lights the edge of the clear plate. Use the included sync cable to connect it to a matching 5V 3-pin motherboard header.

Key Specifications

ModelRGV-LAN-O11-EVO-P
Plate materialClear PMMA acrylic
Plate dimensions (H × W × D)330 × 137 × 32 mm, excluding the installed pump
Coolant port threadG1/4
Pump mountDDC
Pump wiring (with pump)4-pin Molex power and 4-pin PWM control
Lighting5V 3-pin ARGB (Bykski RBW)

Bykski’s plate drawing. Dimensions are in millimeters.

Which Version Do I Need?

Choose the mounting position before you plan your tubing.

Bykski RGV-LAN-O11-EVO-PTHIS PAGE
Choose this side-mount plate to install it next to the motherboard.
Choose this plate to mount it at the front of the same O11 Dynamic EVO case.

What's in the Box

1 × distro plate with ARGB stripMounting hardwareARGB sync cableHex wrenchInstructions

The pump option adds one preinstalled DDC pump with a heatsink cover. Both options use the same ARGB connection. A separate lighting controller is optional.

Installation & Use

1
Check the space for your radiators, fans, fittings, and tubing. Secure the plate to the case’s side bracket using the mounting hardware.
2
If you are mounting a pump directly to the plate, seat the seal between the pump and the plate as shown in the installation instructions.
3
Connect the water blocks and radiators using G1/4 fittings matched to your tubing. Seal unused ports with G1/4 stop plugs.
4
Connect the pump’s power and control leads. Use the supplied sync cable for the 5V 3-pin ARGB header.
5
Fill the loop with coolant and keep the pump wet. Run the pump on its own to check for leaks before powering the rest of the PC.

Also needed — Water blocks, radiators and fans, tubing, G1/4 fittings and stop plugs as needed, and PC coolant. For a plate-mounted pump, choose a DDC pump confirmed to fit this mount.

Bykski’s side bracket mounting diagram.

FAQ

Does it come with a pump?

Choose the pump option for a preinstalled DDC with a heatsink cover. Choose No Pump if you are supplying your own compatible DDC.

Where do the radiators go?

Bykski’s example routes to a 360 mm radiator at the top and another at the bottom. Check the space for your radiator and fans together before choosing parts.

Do I need a separate reservoir?

The plate has a built-in coolant reservoir.

How do I connect the lighting?

Use the included sync cable with a matching 5V 3-pin ARGB motherboard header.

Notes
  • This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • The “5V RBW (A-RGB) with PMD3COV” option includes one preinstalled DDC pump with a heatsink cover. The “No pump” option includes the plate with an empty pump mount. The case, water blocks, radiators, fans, tubing, and fittings shown in the build photos are for illustration.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
  • If not notified in time, the Bykski's latest real object shall prevail.