Lian Li O11 Dynamic Distro Plate for Dual 360 mm Radiators | Bykski RGV-LAN-O11-D360

Bykski · RGV-LAN-O11-D360

Distro plate for two 360 mm radiators

The Bykski RGV-LAN-O11-D360 is an acrylic distribution plate for the original Lian Li PC-O11 Dynamic. Its channels route coolant between the CPU block, a single GPU block, and two 360 mm radiators in a custom loop. The plate mounts beside the motherboard tray and is available with a preinstalled DDC pump or without a pump.

Fits
Lian Li PC-O11 Dynamic
Radiator layout
Top and bottom 360 mm
Port thread
G1/4
Lighting
5 V 3-pin ARGB

Compatibility

Choose by the exact case model.

  • ✓Lian Li PC-O11 Dynamic (original model)

The reference layout uses a CPU block, one GPU block, and a 360 mm radiator at both the top and bottom.

Check your case model before ordering. The O11 Dynamic EVO has a separate Bykski plate in the selection guide below.

Example build in the original PC-O11 Dynamic.

Design Highlights

Pump With Cover configuration.

DDC pump mounts to the plate

Choose Pump With Cover to get a DDC pump already installed with its heatsink cover. Choose No Pump if you plan to install your own compatible DDC pump.

5 V addressable lighting

The Bykski RBW strip lights the acrylic edge. Use a matching 5 V RBW controller or connect to a 5 V 3-pin ARGB motherboard header with a compatible adapter cable.

Aluminum mounting plate

The case screws thread into the aluminum plate on the back of the acrylic body.

Key Specifications

No Pump SKURGV-LAN-O11-D360
Pump With Cover SKURGV-LAN-O11-D360-DPC
Plate face (H × W)342.5 × 132.5 mm
Plate bodyClear and frosted PMMA acrylic
Rear mounting plateAluminum alloy
Port threadG1/4
Pump mountDDC
Radiator layout2 × 360 mm (top and bottom)
LightingBykski RBW, 5 V 3-pin ARGB

Bykski’s drawing shows the dimensions across the face of the plate in millimeters.

Which Version Do I Need?

RGV-LAN-O11-D360THIS PAGE
Choose this product if you plan to source your own loop parts. Select No Pump or Pump With Cover.
Choose the kit if you want a dual 360 mm loop bundle for the original PC-O11 Dynamic. It has Intel and AMD options.
Choose this front-mount plate if your case is the O11 Dynamic EVO.

What's in the Box

1 × acrylic distro plate with ARGB light stripMounting hardware

Pump With Cover adds one preinstalled DDC pump with its heatsink cover. The lighting controller is separate.

Installation & Use

1
Check clearance for the radiators, fans, blocks, and fittings before cutting tubing.
2
If you chose No Pump, fit a compatible DDC pump to the plate. Mount the plate beside the motherboard tray with the screws threaded into the rear aluminum plate.
3
Use G1/4 fittings to connect the plate to the CPU block, the single GPU block, and the top and bottom radiators.
4
Fill with PC coolant and keep the pump primed during filling. Power only the pump while checking the ports and fittings for leaks.

You supply the CPU and GPU water blocks, radiators, fans, G1/4 fittings, tubing, and coolant. For No Pump, also supply a compatible DDC pump.

Bykski’s drawing shows the plate and pump mounting positions.

FAQ

Which O11 Dynamic model does this plate fit?

Bykski lists the original Lian Li PC-O11 Dynamic. For an O11 Dynamic EVO, see the dedicated plate in the selection guide.

Does the distro plate include a pump?

Select Pump With Cover for a preinstalled DDC pump with a heatsink cover. With No Pump, supply your own compatible DDC pump.

Where do the two 360 mm radiators mount?

The reference build places one 360 mm radiator at the top and one at the bottom, with the distro plate beside the motherboard tray.

How do I connect the lighting?

Use a compatible 5 V RBW controller or a 5 V 3-pin ARGB motherboard header with a compatible adapter cable. Keep the 5 V strip off 12 V 4-pin RGB headers.

Notes
  • This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • All pumps, radiators, reservoirs, cases, fittings, and other products in details photos are for reference only.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc., If not notified in time, the Bykski's latest real object shall prevail