Thermaltake AH T600 Distro Plate — Bykski RGV-TT-AHT600-P

Bykski · RGV-TT-AHT600-P

Acrylic distro plate for the Thermaltake AH T600

The Bykski RGV-TT-AHT600-P is an acrylic distro plate for a custom water cooling loop in the Thermaltake AH T600 Full Tower. Channels inside the plate route coolant between the loop's water blocks and radiator. The plate comes with or without a preinstalled DDC pump.

Fits
Thermaltake AH T600
Port thread
G1/4
Pump mount
DDC
Lighting
5V 3-pin ARGB

Compatibility

  • ✓Thermaltake AH T600 Full Tower Chassis

Check the model on your case label before ordering.

Example AH T600 build with separately sourced loop components.

Design Highlights

Coolant channels in clear acrylic

Internal channels carry coolant through the plate. Use G1/4 fittings to connect the plate to your tubing runs.

Direct-mount DDC pump

The plate has a mount for a compatible DDC pump. The pump option arrives with its pump and heat dissipation cover installed.

Motherboard-synced ARGB

The included sync cable connects the lighting to a compatible 5V 3-pin ARGB header.

Key Specifications

ModelRGV-TT-AHT600-P
Plate materialClear CNC-machined acrylic (PMMA)
Acrylic layers8 mm upper cover, 10 mm lower cover
Plate footprint410 × 156 mm
Side profile in drawing33.5 mm
Coolant port threadG1/4
Pump mountDDC
Lighting5V 3-pin ARGB (Bykski RBW)

Manufacturer drawing. Dimensions are in millimeters. Check clearance with your selected pump.

Which Version Do I Need?

AH T600 distro plateTHIS PAGE
Choose this listing if you plan to supply your own loop components. Select the preinstalled DDC pump if you want the pump already fitted to the plate.
Choose the single-GPU kit for the same plate bundled with loop parts. The kit offers a single 360 mm radiator or a 360 mm and 480 mm pair.

What's in the Box

1 × acrylic distro plateMounting hardwareARGB sync cable

The pump option adds one preinstalled DDC pump with a heat dissipation cover. The No pump option ships without a pump. For direct mounting on the plate, supply a compatible DDC pump.

A standalone lighting controller is not included.

Installation & Use

1
With the system powered off, align the plate with the AH T600 mounting bracket. Fasten the screws into the metal mounting points on the back of the plate.
2
If mounting your own DDC pump on the plate, fit the pump and its O-ring according to the pump and plate instructions.
3
Connect your radiator and water blocks with G1/4 fittings and matching tubing. Seal unused coolant ports with stop plugs.
4
For lighting, use the sync cable to connect to a 5V 3-pin ARGB header. Align the 5V pin before plugging it in.
5
Fill the loop with PC coolant and keep the pump supplied with liquid. Leak-test with only the pump powered before switching on the rest of the system.

Plan for a radiator, compatible water blocks, G1/4 fittings and stop plugs, matching tubing, and PC coolant.

Manufacturer drawing showing the plate and chassis mounting points.

FAQ

Which Thermaltake case does this distro plate fit?

It is made for the Thermaltake AH T600 Full Tower Chassis. Check the full model name on your case label.

Does the distro plate include a pump?

The option labeled Pump with heat dissipation cover includes a preinstalled DDC pump. The No pump option ships without a pump.

Which fittings do I need?

Use G1/4 fittings at the plate and match the tubing side of each fitting to your tubing.

Can I connect the lighting to my motherboard?

Yes. Use the included sync cable with a matching 5V 3-pin ARGB header.

How should I clean or fill the acrylic plate?

Use coolant made for PC water cooling and keep liquids that contain alcohol away from the acrylic.

Notes
  • All pumps, radiators, reservoirs, cases, fittings and other products in details photos are for reference only.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
  • If not notified in time, the Bykski's latest real object shall prevail.