Thermaltake Core P8 Distro Plate, Bykski RGV-TT-P8-P, 5V ARGB with Optional DDC Pump

Bykski · RGV-TT-P8-P

Acrylic distro plate for a Thermaltake Core P8 custom loop

The Bykski RGV-TT-P8-P is an acrylic distro plate for custom liquid cooling in the Thermaltake Core P8. Its built-in reservoir and internal channels route coolant between your water blocks and radiator. Choose the preinstalled DDC pump with a heatsink cover or order the plate on its own and install a compatible DDC pump.

Fits
Thermaltake Core P8
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

  • ✓Thermaltake Core P8 TG (Tempered Glass)

Check the case model before ordering. Measure the space for your radiator, fans, fittings, and tubing with the plate in its mounting position.

Bykski’s example Core P8 build. See the box list for what comes with the plate.

Design Highlights

Coolant routing and reservoir in one plate

The clear acrylic shows the reservoir and the paths between the ports. Connect the plate to your blocks and radiator with G1/4 fittings.

Direct-mount DDC pump

The pump option comes with a DDC pump and its heatsink cover already mounted. Choose No pump if you plan to install your own compatible DDC pump.

Key Specifications

Plate modelRGV-TT-P8-P
MaterialClear PMMA acrylic
Plate size (L × W × T)512.00 × 222.50 × 30.50 mm
Port threadG1/4
Pump mountDDC
Lighting5V 3-pin ARGB (Bykski RBW)

Bykski’s plate drawing. Measurements are in millimeters, before adding the pump.

Which Version Do I Need?

RGV-TT-P8-P distro plateTHIS PAGE
Choose this listing if you are sourcing the other loop parts separately. Select the preinstalled DDC pump or No pump.
Choose the kit if you want the matching plate as part of a single-GPU custom loop. Provide your CPU and graphics card models so the water blocks can be selected.

What's in the Box

1 × distro plateMounting hardware5V ARGB light stripLighting sync adapter cableAdjustment moduleHex wrench and instructions

The Pump with heat dissipation cover option adds a preinstalled DDC pump with its heatsink cover.

Installation & Use

1
For the No pump option, fit a compatible DDC pump following Bykski’s pump mounting instructions.
2
Secure the distro plate to the case using the included mounting hardware. Check clearance around the plate before cutting tubing.
3
Connect your water blocks and radiator with G1/4 fittings and tubing. Seal all unused ports.
4
Connect the lighting sync cable to a 5V 3-pin ARGB header, matching the 5V pin to the arrow on the connector.
5
Fill and bleed the loop without running the pump dry. Leak-test with only the pump powered before starting the PC.

You also need water blocks, a radiator and fans, G1/4 fittings, tubing, and coolant. Supply a compatible DDC pump if you select No pump.

Bykski’s drawing shows how the plate attaches to the case bracket.

FAQ

What does a Core P8 distro plate do?

It holds coolant in its built-in reservoir and routes it through internal channels to the tubing connected to your radiator and water blocks.

Does the plate come with a pump?

Choose Pump with heat dissipation cover for a preinstalled DDC pump. Choose No pump to install a compatible DDC pump you supply.

What fittings does the plate use?

Use G1/4 fittings sized for your chosen tubing.

Which lighting header do I need?

Use a 5V 3-pin ARGB header with the lighting sync cable.

How do I check radiator clearance?

Measure the space between the mounted plate and your radiator location, including the fans, fittings, and room for the tubing.

Notes
  • Important Note:
    This distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.
  • Product Upgrade Note:
    As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
    If not notified in time, the Bykski's latest real object shall prevail.