Corsair 4000D Distro Plate Kit for Custom Loops | Bykski RGV-COS-4000D-P

Bykski · RGV-COS-4000D-P

Corsair 4000D distro plate kit for a single-GPU custom loop

The Bykski RGV-COS-4000D-P kit is designed for a hard-tube custom loop in a Corsair 4000D. Its clear acrylic distribution plate routes coolant between the CPU block, GPU block, and radiator. Before ordering, give FormulaMod your exact CPU and graphics card models so the two blocks can be matched to your hardware.

Fits
Corsair 4000D
Plate threads
G1/4
Lighting
5V 3-pin ARGB

Compatibility

The distro plate is shaped for this case.

  • ✓Corsair 4000D

Check the exact model on your case before ordering. Send FormulaMod your CPU and graphics card models and confirm the GPU block against your card’s PCB layout.

Example build showing how the hard tubing runs through the case.

Key Specifications

Distro plate modelRGV-COS-4000D-P
Kit SKURGV-COS-4000D-P_Kits
Plate materialClear PMMA (acrylic)
Plate size (L × W × T)306 × 142 × 30.5 mm
Plate port threadsG1/4
Pump mountDDC
Lighting5V 3-pin ARGB (Bykski RBW)
Radiator in reference build360 mm

The box list follows Bykski’s reference configuration. Confirm the current parts list with FormulaMod when you provide your CPU and graphics card models.

What's in the Box

1 × acrylic distro plate1 × DDC pump1 × CPU water block1 × full-cover GPU water block1 × 360 mm radiatorRadiator fansHard tubingHard-tube fittingsElbow adaptersExtension fittingsStop plugsDrain valveAir vent valveARGB lighting controller

The distro plate accessory list includes mounting screws, a manual, an adapter cable, a hex wrench, and an adjustment module.

Installation & Use

1
Test-fit the distribution plate, radiator, and blocks in the case to check the tubing runs.
2
Secure the distribution plate using its metal mounting points. Follow the instructions for your CPU and GPU blocks.
3
Connect the blocks and radiator to the distribution plate with the hard tubing and G1/4 fittings.
4
Fill the loop with coolant, then leak-test with only the pump powered. Keep the pump supplied with coolant while it runs.

Supply your own PC water-cooling coolant.

FAQ

How do I get the right water blocks?

Send FormulaMod your exact CPU and graphics card models before ordering. Confirm the GPU block against the card’s PCB layout.

What kind of lighting does the kit use?

The kit uses Bykski RBW, a 5V 3-pin addressable RGB connection.

Does the kit include coolant?

Supply your own PC water-cooling coolant.

Notes
  • This distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.
  • The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display.
  • The kit's actual installation results will vary depending on progarm and case, builder ideas, etc.
  • This kit does not contain any coolant. Due to strict restrictions on transport liquids.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc..
  • If not notified in time, the Bykski's latest real object and the newest list shall prevail.