ASUS ROG Hyperion GR701 Distro Plate Kit – Bykski RGV-AS-GR701-P

Bykski · RGV-AS-GR701-P

Distro plate kit for ASUS ROG Hyperion GR701

Build a custom liquid cooling loop in the ASUS ROG Hyperion GR701 with the Bykski RGV-AS-GR701-P distro plate kit. The clear acrylic plate mounts beside the motherboard and routes coolant between the water blocks and radiators. Contact FormulaMod before ordering to confirm whether you want the plate with or without a DDC pump.

Fits
ASUS ROG Hyperion GR701
Port thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Check your case model before ordering.

  • ✓ASUS ROG Hyperion GR701

Use your exact CPU and graphics card models to confirm the water blocks for your build.

Key Specifications

Kit SKURGV-AS-GR701-P_Kits
Distro plate modelRGV-AS-GR701-P
Plate constructionClear PMMA acrylic with an aluminum mounting plate
Plate dimensions (H × W × D)397.5 × 128 × 30.5 mm, per Bykski’s drawing
Port threadG1/4
Lighting5V 3-pin addressable RGB (Bykski RBW)
Pump in Bykski’s reference buildCP-PMD3COV-X DDC

Which Version Do I Need?

Bykski RGV-AS-GR701-P kitTHIS PAGE
Choose this kit if you’re planning a custom loop in an ASUS ROG Hyperion GR701.
See the separate listing for the same GR701 distro plate.
Choose this case-specific plate for a LIAN LI LANCOOL III build.

What's in the Box

1 × Bykski RGV-AS-GR701-P distro plateMotherboard lighting adapter cable for a 5V 3-pin ARGB header1 × DDC pump (with-pump configuration only)

Contact FormulaMod before ordering to confirm your pump configuration and any other parts you need.

Installation & Use

1
If you’re using a DDC pump, follow Bykski’s mounting diagram to fit it. Secure the distro plate to the chassis using the supplied mounting hardware.
2
Use Bykski’s port diagram to route tubing from the plate to the water blocks and radiators. Identify the fill and drain ports before connecting the loop.
3
For motherboard sync, connect the Bykski RBW lead through the included 5V ARGB adapter cable. Align the arrow on the motherboard plug with the 5V pin of the 3-pin ARGB header. Do not use a 12V 4-pin RGB header.
4
Fill the loop and check for leaks with only the pump powered before starting the PC.

Supply your own coolant.

FAQ

What should I send FormulaMod before ordering?

Tell FormulaMod whether you want the plate with or without a DDC pump so we can confirm your configuration.

What fittings connect to the distro plate?

Use G1/4 fittings at the distro plate’s loop ports.

Which header does the lighting use?

For motherboard sync, connect the Bykski RBW lead through the included 5V ARGB adapter cable. Align the arrow on the motherboard plug with the 5V pin of the 3-pin ARGB header. Do not use a 12V 4-pin RGB header.

Notes
  • This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display.
  • This kit does not contain any coolant. Due to strict restrictions on transport liquids.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc.. If not notified in time, the Bykski's latest real object and the newest list shall prevail.