Lian Li O11 AIR MINI Distro Plate Kit | Bykski RGV-LAN-O11AIR-MINI-P

Bykski · RGV-LAN-O11AIR-MINI-P

Lian Li O11 AIR MINI distro plate kit

The Bykski RGV-LAN-O11AIR-MINI-P kit is for a single-GPU custom water-cooling loop in the Lian Li O11 AIR MINI. Its acrylic distribution plate brings the tubing connections for the CPU block, GPU block, and radiator to one panel. Send FormulaMod your exact CPU model before ordering. After ordering, contact us to confirm your graphics card model.

Fits
Lian Li O11 AIR MINI
Plate ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

  • ✓Lian Li O11 AIR MINI

Check the full case name before ordering. Lian Li lists the O11 Dynamic MINI as a separate case.

Key Specifications

Distro plate modelRGV-LAN-O11AIR-MINI-P
Plate materialClear PMMA acrylic
Plate dimensions (L × W × T)287 × 133 × 30.5 mm
Plate port threadG1/4
Pump mountDDC
Lighting5V 3-pin ARGB (Bykski RBW)
Loop layoutSingle GPU

Which Version Do I Need?

Distro Plate KitTHIS PAGE
Choose this kit for a single-GPU loop and confirm the water blocks for your CPU and graphics card with FormulaMod.
Choose the standalone plate if you already have the other loop components.

What's in the Box

Bykski distro plate/reservoir with pump, mounting bracket, and hardware5V ARGB light stripAdapter cable for a 5V 3-pin motherboard ARGB headerARGB lighting controller360 mm slim copper radiator with mounting screwsWhite-blade PWM ARGB fans with mounting screwsCPU water block matched to your CPU, with a motherboard mounting backplateGPU water block matched to your graphics card6 × clear pre-bent 14 mm acrylic hard tubes16 × black 14 mm hard-tube compression fittings10 × black 90° rotary fittings1 × black telescopic valve2 × black stop plugs1 × black air bleed valveBlack extensions (1 × 7.5 mm, 2 × 15 mm, 2 × 25 mm, and 2 × 40 mm)

After ordering, contact us to confirm your graphics card model.

Installation & Use

1
Secure the distro plate to its included mounting bracket in the case.
2
Mount the water blocks selected for your CPU and graphics card. The kit's 360 mm radiator is larger than the radiator sizes Lian Li lists for the O11 AIR MINI (240 mm or 280 mm), so confirm the radiator mounting plan with FormulaMod before ordering. Use the included mounting screws for the radiator and fans.
3
Route the tubing between the components and the plate using G1/4 fittings at the plate.
4
Fill the loop with coolant and power only the pump for the leak test. Check the joints before powering the rest of the PC.

Have coolant on hand before installing.

FAQ

How do I choose the CPU and GPU water blocks?

Send FormulaMod your exact CPU model before ordering. After ordering, contact us to confirm your graphics card model so we can match the GPU water block.

Which motherboard header does the plate lighting use?

Use the included adapter cable to connect the plate lighting to a 5V 3-pin ARGB header on your motherboard.

Which fittings thread into the plate?

The plate uses G1/4 fittings.

Notes
  • The distro plate is designed for the Lian Li O11 AIR MINI. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • This kit does not contain any coolant. Due to strict restrictions on transport liquids.