NZXT H9 Flow Distro Plate Kit for a Single-GPU Custom Loop | Bykski RGV-NZXT-H9 Flow-P

Bykski · RGV-NZXT-H9 Flow-P

A distro plate kit for a single-GPU custom loop

The Bykski RGV-NZXT-H9 Flow-P kit brings a hard-tube custom loop to the NZXT H9 Flow (2023). Its acrylic distro plate combines the reservoir and coolant channels with a directly mounted DDC pump. The default kit includes two 360 mm radiators and water blocks selected for your CPU and one graphics card.

Fits
NZXT H9 Flow (2023)
Pump
DDC with PWM control
Hard tubing
14 mm OD
Lighting
5V 3-pin A-RGB

Compatibility

Check the model number on your case before ordering.

  • ✓NZXT H9 Flow (2023), CM-H91FB-01 (black)
  • ✓NZXT H9 Flow (2023), CM-H91FW-01 (white)

Send FormulaMod your CPU socket and exact graphics card brand and model. Confirm the GPU's PCB layout before selecting the blocks for your order.

Bykski’s example build in an NZXT H9 Flow.

Design Highlights

The reservoir and pump share one panel

The clear acrylic shows the coolant level and the machined channels. Connect the CPU block, GPU block, and radiators to the plate through its G1/4 ports.

5V addressable lighting

The plate uses Bykski RBW lighting. Use a compatible 5V 3-pin A-RGB connection.

Key Specifications

Distro plate modelRGV-NZXT-H9 Flow-P
Plate materialClear PMMA acrylic with an aluminum rear mount
Plate dimensions (L × W × D)380 × 123 × 30.5 mm, as drawn
Plate port threadG1/4
PumpBykski CP-PMD3COV-X DDC with heatsink cover
Pump connections12V DC via 4-pin Molex, plus a separate 4-pin PWM connector for speed control
Pump rated head6 m
Radiators in the default kit360 mm class, 30 mm thick, with copper water channels
Hard tubing14 mm outside diameter
Plate lighting5V 3-pin addressable RGB (RBW)

Manufacturer drawing of the plate. Measurements are in millimeters.

Which Version Do I Need?

Choose based on which parts you already have for your loop.

Single-GPU Distro Plate KitTHIS PAGE
Choose this kit for the distro plate, DDC pump, matched CPU and GPU blocks, and the radiators, fans, tubing, and fittings for the default build.
Choose the standalone 5V A-RGB plate if you are sourcing the rest of the loop separately. Select the plate with a covered DDC pump or the plate without a pump.

What's in the Box

1 × distro plate1 × DDC pump with heatsink cover1 × CPU water block1 × full-cover GPU water block with its matching backplate and thermal pads2 × 360 mm radiators6 × 120 mm fans7 × 14 mm OD hard tubes14 × G1/4 fittings for 14 mm OD hard tubing8 × 90° rotary elbows2 × 15 mm extensions2 × 20 mm extensions4 × 40 mm extensions1 × expansion fitting1 × drain valve2 × G1/4 stop plugs1 × pressure vent valve1 × 5V A-RGB controller

The quantities above are for Bykski’s default kit configuration. Confirm the CPU and GPU blocks and the final parts list before ordering.

Bykski’s plate accessory list includes mounting screws, instructions, an adapter cable, a hex key, and an adjustment module.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Check the case model, then test-fit the radiators with their fans and check the combined clearance.
2
Secure the distro plate using its rear aluminum mount. Install the radiators and fans, then follow the instructions for your matched CPU and GPU blocks.
3
Measure the hard-tube runs after the parts are in place. Use the G1/4 fittings to connect the blocks and radiators to the plate, and seal any unused ports.
4
Connect pump power to Molex and the speed-control lead to a 4-pin PWM header. Use a 5V 3-pin A-RGB connection for the plate lighting.
5
Keep the case upright and fill through a top inlet. Top up the coolant as air clears, keep the pump from running dry, and leak-test with only the pump powered.

Supply your own PC coolant. If you need extra tube fittings, the kit uses Bykski B-FTHTJ-L14 fittings for 14 mm OD hard tubing.

Bykski’s example routing with radiators at the top and bottom.

FAQ

Which NZXT H9 Flow does this kit fit?

It is designed for the NZXT H9 Flow (2023). Check the case label for CM-H91FB-01 or CM-H91FW-01.

How do I choose the CPU and GPU water blocks?

Send FormulaMod your CPU socket and exact graphics card brand and model before ordering. Confirm the card’s PCB layout so the included block matches your card.

Does the kit include a pump and reservoir?

The kit includes a DDC pump that mounts directly to the distro plate. The plate itself holds the coolant, so you can build the loop without a separate reservoir.

What size radiators come in the default kit?

The default kit lists two 360 mm radiators, each 30 mm thick. Check the clearance with your fans installed.

Do I need to buy coolant separately?

Yes. Supply your own PC coolant before you fill and leak-test the loop.

Notes
  • This distro plate kit, which only include the products in the corresponding kit list. The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display. The kit's actual installation results will vary depending on program and case, builder ideas, etc.
  • The products in Bykski's pictures of the build,  do not represent the kit list. Some of the products in the pictures are Bykski high-end products, or modified for a more beautiful build, which will be different from the products mentioned in the kit list. Please refer to the kit list and confirm the final component models with FormulaMod before ordering. If you want the exact same appearance as the picture, please contact the seller.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc.. If not notified in time, the Bykski's latest real object and the newest list shall prevail.