Phanteks Evolv X Distro Plate Kit, Bykski RGV-PHA-PK518-P, 5V ARGB

Bykski · RGV-PHA-PK518-P

Distro plate kit for the Phanteks Evolv X

The Bykski RGV-PHA-PK518-P distro plate kit is designed for the Phanteks Enthoo Evolv X Glass. The clear acrylic plate routes coolant between the CPU block, GPU block, and radiators in a single-GPU custom loop. It has G1/4 ports and a built-in mount for a compatible DDC pump.

Fits
Phanteks PH-ES518XTG
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Check the model code on your case before ordering.

  • ✓Phanteks Enthoo Evolv X Glass (PH-ES518XTG)

Send FormulaMod your exact CPU model before ordering so the CPU block can be matched to your hardware. Verify your graphics card’s PCB revision for the GPU block.

Key Specifications

Distro plate modelRGV-PHA-PK518-P
Plate materialClear PMMA acrylic
Port threadG1/4
Pump mountDDC type
LightingBykski RBW, 5V 3-pin ARGB

What's in the Box

1 × Bykski RGV-PHA-PK518-P distro plateDistro plate mounting hardwareWater pump for the distro plateCPU water block with motherboard backplate, matched to your CPU1 × GPU water block matched to your graphics card1 × 240 mm copper radiator with mounting screws (AMD and Intel)1 × 360 mm copper radiator with mounting screws (Intel only)PWM ARGB fans with mounting screws6 × pre-bent acrylic hard tubes14 × hard-tube fittings7 × 90° rotary fittingsExtension fittings1 × telescoping valveAir vent valve1 × stop plugARGB lighting controllerMotherboard adapter cable for a 5V 3-pin ARGB header

After ordering, contact FormulaMod to confirm your exact graphics card model for the GPU block.

Installation & Use

1
Mount the distro plate in the case using the screw points on the plate’s metal backing.
2
Fit the matched water blocks and route tubing between the blocks, radiators, and distro plate using G1/4 fittings at the plate.
3
Connect the included lighting adapter cable to the motherboard’s 5V 3-pin ARGB header. Align the plug’s arrow with the 5V pin.
4
Fill the loop and run only the pump to check for leaks before powering the rest of the PC.

Supply coolant for the loop.

FAQ

Which Phanteks case fits this distro plate?

Check for the PH-ES518XTG model code on your Phanteks Enthoo Evolv X Glass.

How are the CPU and GPU blocks selected?

The CPU block is matched to your CPU. After ordering, contact FormulaMod to confirm your exact graphics card model for the GPU block.

What fittings does the distro plate take?

Use fittings with G1/4 threads at the distro plate ports.

Notes
  • This distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.
  • The kit ships with the components on the packing list for your configuration.
  • Any items shown that are outside your configuration’s packing list, such as the case, RAM blocks, and motherboard, are for display only. Installation results vary with the loop layout, case, and build choices.
  • This kit does not contain any coolant. Due to strict restrictions on transport liquids.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc.. If not notified in time, the Bykski's latest real object and the newest list shall prevail.