Description
The Bykski EXPJ series is a telescoping fitting for custom PC water cooling. It joins two aligned G1/4 female ports, such as the facing ports on two GPU water blocks connected in series. The joint adjusts along its axis so you can match the space between the ports.
Confirm the gap between the port seating faces and the clearance around the fitting before ordering.
The center section slides to match the gap between facing ports. Measure between the two port seating faces before choosing a size.
The textured collar gives you a place to grip the fitting when you loosen it to adjust the length.
Each end screws into a female port. Coolant flows through the center of the fitting from one port to the other.
| B-EXPJ-X adjustment range | 16–22 mm |
|---|---|
| B-EXPJ-X31 maximum reach | 31 mm |
| B-EXPJ-X41 adjustment range | 41–69 mm |
| Thread | G1/4 male at both ends |
| Threaded length | 5 mm per end |
| Outside diameter | 20.72 mm |
| B-EXPJ-X41 material | Brass |
| Colors | Black, silver, white, and gold |
Match the gap between the two port seating faces to the fitting’s adjustment range.
You’ll need two aligned G1/4 female ports on components in your custom water-cooling loop.
It’s a through-fitting that carries coolant between two ports. Use it to join a pair of G1/4 female ports.
Yes, you can connect them in series when the two ports face each other, use G1/4 female threads, and fall within the joint’s adjustment range.
Measure from one port’s seating face to the other along their shared centerline. Leave the threaded portions out of the gap measurement.
Each option includes one expansion joint in the size and color you select.