Lian Li O11 Dynamic EVO XL Distro Plate, Front Mount | Bykski RGV-LAN-O11EVOXL-LI-P

Bykski · RGV-LAN-O11EVOXL-LI-P

Front distro plate for the Lian Li O11 Dynamic EVO XL

The Bykski RGV-LAN-O11EVOXL-LI-P is a front-mount distribution plate for the Lian Li O11 Dynamic EVO XL. Its clear acrylic body combines a coolant reservoir and machined channels that route a custom loop between water blocks and radiators. The plate takes G1/4 fittings and can mount a DDC pump directly.

Fits
Lian Li O11 Dynamic EVO XL
Fitting thread
G1/4
Pump mount
DDC
Lighting
5V 3-pin ARGB

Compatibility

  • ✓Lian Li O11 Dynamic EVO XL

Not compatible:

  • ✗Lian Li O11 Dynamic EVO
  • ✗Lian Li O11 Dynamic XL

The plate mounts in the front glass position. Check that the case label says O11 Dynamic EVO XL before ordering.

Bykski example build showing the plate in the front panel position.

Design Highlights

Bykski illustration of the plate with a DDC pump installed.

Reservoir and coolant channels in one plate

The clear acrylic reservoir lets you see the coolant level at the front of the case. Built-in channels route coolant between the loop components, and the DDC pump mounts directly to the plate.

Built-in 5V addressable lighting

Connect the installed Bykski RBW LED strip to a compatible 5V 3-pin ARGB motherboard header with the sync cable, or use a compatible 5V ARGB controller.

Adjust the CPU tube alignment

If you use a CPU port adjustment module, you can shift the position of the CPU loop connections on the plate. Check alignment against your motherboard and CPU block before cutting tubing.

Key Specifications

ModelRGV-LAN-O11EVOXL-LI-P
Mounting positionFront panel
Plate materialClear CNC-machined PMMA acrylic
Acrylic layers8 mm top cover and 10 mm bottom cover
Plate size (H × W × D)494.50 × 300 × 34.00 mm without pump
Port threadG1/4
Direct pump mountCompatible standard-size DDC
Lighting5V 3-pin ARGB (Bykski RBW)
Reference kit pump power4-pin Molex power and separate 4-pin PWM control (CP-PMD3COV-X)

Bykski drawing. Dimensions are in millimeters.

Which Version Do I Need?

Match the front plate to the full case model.

O11 Dynamic EVO XLTHIS PAGE
Choose RGV-LAN-O11EVOXL-LI-P for the EVO XL.
Choose RGV-LAN-O11-EVO-LI-P for the standard O11 Dynamic EVO.

What's in the Box (Plate-Only Options)

Distro plate with installed ARGB stripMounting hardwareARGB sync cableHex keyInstructions

Plate with pump. Includes a preinstalled DDC pump with a heatsink cover.

Plate without pump. Supply a compatible standard-size DDC pump. Both plate-only options require a separate controller if you are using one instead of a motherboard ARGB header.

Distro Plate Kit Contents

Bykski’s default kit configuration is listed below for reference. Confirm the final contents when ordering and provide your CPU and exact graphics card models so the water blocks can be matched.

Cooling components. 1 × distro plate, 1 × CPU water block, 1 × full-cover GPU water block, 1 × Bykski CP-PMD3COV-X DDC pump, 3 × 360 mm radiators, 10 × fans, and 1 × lighting controller.

Tubing and fittings. 9 × rigid tubes, 18 × fittings for 14 mm OD rigid tubing, 8 × 90° rotary elbows, G1/4 extensions (3 × 7.5 mm, 1 × 20 mm, 2 × 25 mm, and 2 × 30 mm), 1 × drain valve, and 1 × pressure relief valve.

The kit does not include coolant.

Installation & Use

1
Check the case model. Remove the front glass panel using the Lian Li case manual.
2
If you chose the no-pump plate, confirm your DDC pump fits the mount and install it with its seal as shown in the Bykski instructions.
3
Position the distro plate in the front opening and secure it with the supplied screws at the rear mounting inserts.
4
Lay out the blocks and radiators and connect the tubing with G1/4 fittings matched to your tubing. Seal unused ports with suitable plugs.
5
Connect the lighting to a 5V 3-pin ARGB header or compatible controller. Fill and bleed the loop, keeping the pump supplied with coolant. Leak-test with only the pump powered before turning on the PC.

For a plate-only build, supply water blocks, radiators, fans, tubing, matching fittings, plugs, and coolant. Add a compatible DDC pump if you chose the no-pump option.

Bykski installation drawing showing the front mounting points.

FAQ

Does this fit the O11 Dynamic EVO or the O11 Dynamic XL?

This plate fits only the Lian Li O11 Dynamic EVO XL. Check the full case model before ordering.

Do I need a separate reservoir or pump?

The plate includes a reservoir. Choose the plate with a preinstalled DDC pump or supply a compatible standard-size DDC for the no-pump version.

Which fittings and tube size should I use?

The plate takes G1/4 fittings. For a plate-only build, choose fittings sized to your tubing. The default kit list includes fittings for 14 mm OD rigid tubing.

Can I connect the lighting directly to my motherboard?

Yes. Use the sync cable with a 5V 3-pin ARGB header. If your board lacks that header, use a compatible 5V ARGB controller.

How do I choose the water blocks for the kit?

Provide your CPU and exact graphics card models when ordering so the corresponding water blocks can be selected.

Notes
  • This distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risk.
  • As Bykski reserves the right to modify or upgrades or adjusts the contents of the kit at any time, such as product updates version, model or appearance, adjustments to the kit list, etc..
  • If not notified in time, the Bykski's latest real object and the newest list shall prevail. Except for special circumstances, generally we will arrange the latest products.
  • The kit's actual installation results will vary depending on program and case, builder ideas, etc..
  • The products such as case, RAM blocks, motherboard, graphics card etc. outside the list, only for installation effect display and layout reference.
  • The products in Bykski's details photos of the build, do not represent the kit list.