Bykski · N-AS5090TUF-X
Full-cover water block for ASUS TUF Gaming RTX 5090
The Bykski N-AS5090TUF-X is a full-cover water block for the ASUS TUF Gaming GeForce RTX 5090 32GB GDDR7 with the PCB layout shown in the Compatibility photo below. It replaces the stock cooler and transfers heat from the GPU die, memory, and power stages to a custom liquid cooling loop. It connects through G1/4 ports and includes an aluminum backplate.
Fits
Listed ASUS TUF 32GB PCBs
Coverage
GPU, memory, and VRM
Ports
G1/4 inlet and outlet
Backplate
Aluminum, included
Compatibility
Bykski lists these card models for the RTX 5090 PCB layout in the reference photo.
- ✓ASUS TUF Gaming GeForce RTX 5090 32GB GDDR7 (TUF-RTX5090-32G-GAMING)
- ✓ASUS TUF Gaming GeForce RTX 5090 D 32GB GDDR7 (TUF-RTX5090D-32G-GAMING)
Before ordering, check the full model number on your card and compare its entire PCB with Bykski’s reference photo.
Bykski’s RTX 5090 PCB reference photo for N-AS5090TUF-X.
Design Highlights
Copper cold plate
The cold plate picks up heat from the GPU die, memory, and voltage regulators. Coolant flows through the plate’s microchannels and carries that heat into the loop.
Separate aluminum backplate
The included backplate mounts behind the PCB. Coolant flows through the front block only.
Key Specifications
| Model | N-AS5090TUF-X |
|---|
| Block type | Full-cover GPU water block |
|---|
| Cold plate | Copper |
|---|
| Cooling coverage | GPU die, graphics memory, and VRM |
|---|
| Port thread | G1/4 inlet and outlet |
|---|
| Backplate | Passive aluminum backplate |
|---|
Which Version Do I Need?
Match the PCB first, then choose a block by its full part number.
Bykski N-AS5090TUF-XTHIS PAGE
Choose this full-cover block with backplate for a custom loop if your ASUS TUF 32GB card is listed above and its PCB matches the Compatibility photo.
Choose this version if you want 5V ARGB lighting and your PCB matches the V2 listing.
Choose this model if you want the Full Armor shroud and your PCB matches the Granzon listing.
What's in the Box
1 × full-cover GPU water block1 × aluminum backplateMounting hardwareThermal pads
Please provide G1/4 stop plugs for any unused ports.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Power down the PC and remove the graphics card. Take off its stock cooler and backplate, then clean away the old thermal material.
2Place thermal pads on the memory and power stages. Apply your own thermal paste to the GPU die.
3Align the water block with the PCB mounting holes, then secure the block and backplate at the corresponding holes.
4Connect the block to your loop with G1/4 fittings. Seal any unused ports with G1/4 stop plugs. Fill the loop and run only the pump to check for leaks before powering the graphics card.
For the rest of the loop, use a pump and reservoir, a radiator with fans, G1/4 fittings matched to your tubing, and coolant.
PCB drawing from Bykski’s block and backplate mounting instructions.
FAQ
How do I check whether my ASUS TUF RTX 5090 fits?
Match the full ASUS model number to the Compatibility list and compare your entire PCB with the Bykski photo in that section before ordering.
Does this RTX 5090 water block include a backplate?
Yes. The included aluminum backplate mounts on the back of the PCB and sits outside the coolant path.
What thread do I need for the fittings?
Use G1/4 fittings at the inlet and outlet. Match the fitting’s tubing end to the tubing you use.
Can I use this block on its own?
It needs a custom liquid cooling loop with a pump and reservoir, a radiator with fans, fittings, tubing, and coolant.
Notes- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.