Bykski · N-H100-80G-X-V2
Full-cover water block for the NVIDIA H100 and H800 80GB
The Bykski N-H100-80G-X-V2 is a full-cover GPU water block with a backplate. It replaces the stock cooler and uses a custom liquid-cooling loop to remove heat from the GPU core, memory, and voltage regulators. Its nickel-plated copper cold plate sits against the components through thermal paste or pads.
Fits
NVIDIA H100 / H800 80GB
Coverage
GPU core, memory and VRM
Cold plate
Nickel-plated copper
Compatibility
Confirmed GPU models
- ✓NVIDIA H100 80GB
- ✓NVIDIA H800 80GB
Compare your exact PCB layout with the reference before ordering.
NVIDIA H100 PCB: compare with your board before ordering
Design Highlights
Coolant flow illustration from the earlier Bykski N-H100-80G-X
Direct cooling across the board
The full-cover block cools the GPU core, memory, and voltage regulators.
Microchannel detail (manufacturer render of the earlier N-H100-80G-X)
Designed for sustained use
The block works as part of a custom liquid-cooling loop with a separate pump and radiator.
Cold plate contact surfaces on the N-H100-80G-X-V2
Nickel-plated copper cold plate
The cold plate is made of nickel-plated high-purity copper.
Key Specifications
| Model | N-H100-80G-X-V2 |
|---|
| Compatible cards | NVIDIA H100 80GB, NVIDIA H800 80GB |
|---|
| Cold plate material | Nickel-plated high-purity copper |
|---|
| Backplate | Black backplate included |
|---|
| Lighting | None (no RGB) |
|---|
What's in the Box
Full-cover GPU water blockBlack backplateInstallation hardware
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
1Remove the original cooler and clean off the old thermal material.
2Line up the block’s mounting holes with the PCB. If the holes do not match, stop and verify the PCB layout.
3Apply your own thermal paste to the GPU die. Place thermal pads where the cold plate has matching contact surfaces.
4Fit the block and backplate, then tighten the screws evenly without over-tightening.
5Install suitable fittings on the block and connect the tubing.
6Leak-test the loop before powering the system.
You will also need a pump, a radiator, compatible fittings, tubing, and coolant to build a loop.
FAQ
Which cards does this block fit?
The confirmed models are the NVIDIA H100 80GB and H800 80GB. Check that your PCB layout matches before ordering.
Does it include a backplate?
Yes. The block comes with a black backplate.
Does it have RGB lighting?
No. This version has no lighting.
Do I need a separate pump and radiator?
Yes. You need a pump, radiator, compatible fittings, tubing, and coolant for the custom loop.
What cold plate does this H100 water block use?
It uses a nickel-plated copper cold plate as part of the full-cover water block.
Notes- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- The copper plate is CNC machined. Machining marks and slight unevenness are normal and do not affect use.
- Place thermal pads only where the block has matching contact surfaces. Pads placed elsewhere can prevent proper contact.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.