RTX 6000 Ada Full-Cover GPU Water Block with Backplate | Bykski N-RTX6000-X

Bykski · N-RTX6000-X

Full-cover water block for the RTX 6000 Ada

The Bykski N-RTX6000-X is a full-cover water block with a backplate for the NVIDIA RTX 6000 Ada Generation 48 GB workstation card. It replaces the stock blower cooler and transfers heat from the GPU core, memory, and power stages to a custom liquid-cooling loop. The block has G1/4 ports and a nickel-plated T2 copper cold plate.

Fits
RTX 6000 Ada 48 GB
Coverage
GPU, memory, and VRM
Cold plate
Nickel-plated T2 copper
Port thread
G1/4

Compatibility

  • ✓NVIDIA RTX 6000 Ada Generation 48 GB, full-height PCIe workstation card

Not compatible:

  • ✗NVIDIA RTX PRO 6000 Blackwell series
  • ✗NVIDIA GeForce RTX 4090
  • ✗NVIDIA GeForce RTX 4080

Before ordering, compare your card’s PCB outline, mounting holes, and component layout with the diagram.

NVIDIA RTX 6000 Ada PCB layout

Design Highlights

Coolant passes over the GPU core

Jet microchannels give the coolant more surface area to pick up heat from the copper cold plate. The same plate draws heat from the memory and power stages through the thermal pads. The loop carries that heat to the radiator during long rendering jobs.

Manufacturer coolant-path diagram

Side inlet and outlet

The G1/4 inlet and outlet sit on the side of the black POM terminal. Check clearance for both fittings and the tubing bends when you plan the loop.

Key Specifications

ModelBykski N-RTX6000-X
Block typeFull-cover GPU water block
Cold plateNickel-plated T2 copper
Face panelStainless steel
Port terminalBlack POM, side inlet and outlet
Fitting threadG1/4
Block dimensions276.01 × 97.04 × 37.91 mm
BackplateAluminum, 179.39 × 97.04 × 5.00 mm
LightingNone

Block dimensions in millimeters

Which Version Do I Need?

Check the full card name first. The RTX A6000 is an Ampere card with a similar name. For the RTX 6000 Ada, choose between a standalone block and an all-in-one kit based on the cooling hardware you already have.

Bykski N-RTX6000-XTHIS PAGE
Choose this full-cover block with an aluminum backplate if you are adding the RTX 6000 Ada to a custom loop.
Choose this standalone Astralcooler block if you want another option for a custom loop.
Choose the all-in-one kit if you need the block, pump, radiator, and fans together.

What's in the Box

1 × GPU water block1 × aluminum backplate8 × 1.5 mm thermal pads4 × 0.5 mm gaskets4 × spring screws4 × backplate screws

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Remove the stock cooler and clean off the old paste and pad residue. Check that the block’s mounting points line up with the PCB.
2
Use the front and back diagrams below to trim and place the 1.5 mm pads. Leave the inductors bare and apply a thin layer of your own GPU thermal paste to the die.
3
Fit the gaskets, water block, and backplate as shown. Tighten the screws evenly in a cross pattern.
4
Connect the tubing to the ports marked IN and OUT using G1/4 fittings.
5
Fill and bleed the loop, then check for leaks while the graphics card is still unpowered.

You also need a pump, reservoir, radiator with fans, G1/4 fittings, tubing, coolant, and your own GPU thermal paste.

1 Water block · 2 Thermal pads · 3 Graphics card PCB · 4 Gaskets · 5 Spring screws · 6 Backplate · 7 Backplate screws

Thermal Pad Placement

Front of PCB. Use 1.5 mm pads on the shaded memory and power-stage areas. Apply thermal paste to the central GPU die.

Back of PCB. Use 1.5 mm pads on the four shaded areas.

FAQ

Does the RTX 6000 Ada come with a blower cooler?

Yes. NVIDIA ships the RTX 6000 Ada 48 GB with an active blower cooler. This block replaces it when you convert the card to liquid cooling.

Does this block fit the RTX PRO 6000 Blackwell?

Choose this block for the RTX 6000 Ada PCB shown above. The RTX PRO 6000 Blackwell series uses other board layouts.

Do I need a separate pump and radiator?

Yes. The block connects to an existing custom loop or one you build with a pump, reservoir, radiator, and the required fittings and tubing.

What thickness are the thermal pads?

The kit includes 1.5 mm pads. See the Thermal Pad Placement diagrams for the front and back of the PCB.

Notes
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.