Description
The Bykski N-TESLA-L40-X is a full-cover water block for the NVIDIA L40 48GB PCIe data center GPU. It replaces the card’s passive heatsink and connects to a custom liquid cooling loop. Its nickel-plated copper cold plate draws heat from the GPU die, memory, and power stages. The included aluminum backplate mounts behind the PCB.
Bykski lists one PCB layout for this block.
Bykski also calls this card the Tesla L40. Before ordering, match your card’s exact PCB layout and mounting holes to Bykski’s PCB drawings.
The 157.09 mm copper plate spans the contact areas on the front of the card. The aluminum backplate fastens behind the PCB, outside the coolant path.
Bykski specifies up to 44 channels in the cold plate. The microchannels increase the area where coolant contacts the copper.
Follow the inlet and outlet markings when plumbing the block. Coolant carries heat from the cold plate to the radiator in your loop.
| Model (SKU) | N-TESLA-L40-X |
|---|---|
| Cooling type | Full-cover block for a custom loop |
| Cold plate | Nickel-plated T2 copper |
| Cold plate length | 157.09 mm |
| Microchannels | 0.3 mm jet microchannels |
| Backplate | Black aluminum |
| Water block (L × W × T) | 271.59 × 97.04 × 37.91 mm |
| Backplate (L × W × T) | 179.39 × 97.04 × 5.00 mm |
| Thermal pads | 1.5 mm |
Check the model on your card first. NVIDIA lists the L40, L40S, and Tesla P40 as separate models.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need a pump, reservoir, radiator with fans, compatible fittings, tubing, and coolant.
The stock L40 has a passive heatsink that relies on chassis airflow. With this block installed, your pump circulates coolant through the block and radiator.
Yes. This block connects to a custom loop, so supply a pump, radiator, and the other loop parts listed above.
Bykski uses the same aluminum backplate with the N-RTX6000-X. Use the L40 PCB drawings and compatibility list to identify the right water block.
Compare the block drawing with the space around your card. Allow room for fittings and tubing at the terminal, plus space for your loop’s radiator.