Gigabyte RTX 3090 / 3080 Ti / 3080 Water Block with Active Backplate, Bykski N-GV3090GMOC-TC-V2

Bykski · N-GV3090GMOC-TC-V2

Full-cover GPU water block with an active backplate

The Bykski N-GV3090GMOC-TC-V2 is a full-cover GPU water block for select Gigabyte GeForce RTX 3090, RTX 3080 Ti, and RTX 3080 cards. The front block cools the GPU core, memory, and voltage regulators. A bridge carries coolant through the included active backplate so the same custom loop can cool both sides of the card.

Fits
Select Gigabyte RTX 30-series PCBs
Backplate
Active liquid cooling
Ports
G1/4
Lighting
5V ARGB

Compatibility

Supported Gigabyte models with matching PCB layouts

  • ✓Gigabyte GeForce RTX 3090 Gaming OC 24G
  • ✓Gigabyte GeForce RTX 3090 Eagle OC 24G
  • ✓Gigabyte GeForce RTX 3090 Vision OC 24G
  • ✓Gigabyte GeForce RTX 3090 Turbo 24G
  • ✓Gigabyte GeForce RTX 3080 Ti Gaming OC 12G
  • ✓Gigabyte GeForce RTX 3080 Ti Eagle OC 12G
  • ✓Gigabyte GeForce RTX 3080 Ti Vision OC 12G
  • ✓Gigabyte GeForce RTX 3080 Ti Turbo 12G
  • ✓Gigabyte GeForce RTX 3080 Gaming OC 10G
  • ✓Gigabyte GeForce RTX 3080 Eagle OC 10G
  • ✓Gigabyte GeForce RTX 3080 Vision OC 10G
  • ✓Gigabyte AORUS RTX 3080 Gaming Box (internal GPU PCB)

Not compatible:

  • ✗GeForce RTX 3090 Ti

Bykski’s compatibility chart calls the three Gaming OC models above “Gaming OC 3X.”

Before ordering, verify your exact card model and compare the entire PCB layout with Bykski’s compatibility diagram.

Key Specifications

Bykski modelN-GV3090GMOC-TC-V2
Front water blockCopper and acrylic (PMMA)
Active backplateCopper and acrylic (PMMA)
Port threadG1/4 inlet and outlet
Lighting5V addressable RGB (RBW)

What's in the Box

1 × full-cover GPU water block1 × active backplate1 × bridge moduleMounting hardware and seals2× G1/4 stop plugsThermal pads5V ARGB lighting

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the stock cooler and clean off the old thermal material. Check that the block and PCB mounting holes line up.
2
Place thermal pads where the installation diagram for your PCB specifies. Apply your own thermal paste to the GPU core.
3
Mount the front block and active backplate, then fit the bridge with its seals seated.
4
Connect the inlet and outlet to the loop using G1/4 fittings. Leak-test the loop before powering the graphics card.

You also need a pump, radiator, G1/4 fittings, tubing, and coolant.

FAQ

Will this block fit an RTX 3090 Ti?

No. Use the Compatibility list to check your exact card model and match its PCB before ordering.

Does coolant flow through the backplate?

Yes. The bridge connects the front block and the active backplate so coolant flows through both.

Can I plug the lighting into a 12V RGB header?

Use a compatible 5V ARGB (RBW) connection. A 12V RGB header can damage the lighting.

Notes
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.