Bykski · N-AS5080ASTRAL-X
RTX 5080 Astral full-cover GPU water block
The Bykski N-AS5080ASTRAL-X replaces the stock cooler on the ASUS ROG Astral GeForce RTX 5080 16GB GAMING. The full-cover block transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. A separate aluminum backplate mounts behind the graphics card.
Fits
ASUS ROG Astral PCB listed below
Cold plate
Nickel-plated T2 copper
Compatibility
Bykski lists this card for the water block.
- ✓ASUS ROG Astral GeForce RTX 5080 16GB GAMING (ROG-ASTRAL-RTX5080-16G-GAMING)
Not compatible:
- ✗Graphics cards with a different PCB layout
Before ordering, verify your exact ASUS model code and compare your card’s bare PCB with Bykski’s compatibility diagram.
ASUS ROG Astral RTX 5080 16GB GAMING, shown with the factory cooler installed.
Key Specifications
| Model | N-AS5080ASTRAL-X |
|---|
| Cold plate | Nickel-plated T2 copper |
|---|
| Transparent section | Acrylic |
|---|
| Backplate | Aluminum |
|---|
| Cooling coverage | GPU core, memory, and VRM |
|---|
| Port thread | G1/4 end ports |
|---|
| Block dimensions (L × W × T) | 283.02 × 136.25 × 33.60 mm |
|---|
| Lighting | 5V addressable RGB (RBW) |
|---|
What's in the Box
1 × full-cover GPU water block1 × aluminum backplate2× G1/4 stop plugsMounting hardwareThermal pads
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Remove the stock cooler and clean the old thermal material from the GPU and the pad contact areas.
2Use Bykski’s placement diagram to put thermal pads on the specified memory and power components. Apply your own thermal paste to the GPU die.
3Align the mounting holes and secure the water block and backplate with the supplied mounting hardware.
4Connect the block to the loop with G1/4 fittings and seal unused ports. Leak-test the loop before powering the card.
For a new loop, you also need a pump, reservoir, radiator, fittings, tubing, and coolant.
FAQ
Which RTX 5080 Astral does this water block fit?
Bykski lists the ASUS ROG Astral RTX 5080 16GB GAMING. Confirm your exact model code and PCB layout in the Compatibility section before ordering.
What fittings does the water block use?
Use G1/4 fittings for the inlet and outlet.
Which RGB connection should I use?
Use a compatible 5V addressable RGB (RBW) connection. A 12V RGB connection can damage the lighting.
Notes- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.