Bykski · N-AS4070TITUF-X-V2
Full-cover water block for select ASUS RTX 4070 cards
The Bykski N-AS4070TITUF-X-V2 is a full-cover water block for select ASUS cards, including the TUF Gaming GeForce RTX 4070 Ti SUPER and Dual GeForce RTX 4070 SUPER. It replaces the stock cooler and transfers heat from the GPU, memory, and power delivery components to a custom liquid-cooling loop.
Fits
Select ASUS TUF & Dual
Compatibility
Bykski lists these ASUS PCB layouts for the V2 block.
- ✓ASUS TUF Gaming GeForce RTX 4070 Ti SUPER BTF White OC 16GB (TUF-RTX4070TIS-O16G-BTF-WHITE)
- ✓ASUS TUF Gaming GeForce RTX 4070 Ti 12GB (TUF-RTX4070TI-12G-GAMING)
- ✓ASUS TUF Gaming GeForce RTX 4070 Ti SUPER 16GB (TUF-RTX4070TIS-16G-GAMING)
- ✓ASUS TUF Gaming GeForce RTX 4070 OC 12GB (TUF-RTX4070-O12G-GAMING)
- ✓ASUS Dual GeForce RTX 4070 12GB (DUAL-RTX4070-12G)
- ✓ASUS TUF Gaming GeForce RTX 4070 SUPER OC 12GB (TUF-RTX4070S-O12G-GAMING)
- ✓ASUS Dual GeForce RTX 4070 SUPER 12GB (DUAL-RTX4070S-12G)
Before ordering, match the exact ASUS model number and verify your card’s PCB layout. If the PCB revision is unclear, contact support with your model number.
Bykski’s PCB layout illustration. Verify the board layout for your exact card.
Design Highlights
Copper cold plate
The T2 copper cold plate draws heat from the GPU, memory, and voltage regulators. The clear acrylic top lets you see the coolant path and the 0.3 mm microchannel section over the GPU.
Black aluminum backplate
The included backplate mounts behind the graphics card PCB. Coolant flows through the front water block.
Addressable lighting
The 5V ARGB strip lights the clear block. Use a compatible Bykski 5V 3-pin ARGB adapter cable for motherboard sync. The optional lighting controller lets you run the lighting independently.
Key Specifications
| Model | Bykski N-AS4070TITUF-X-V2 |
|---|
| Cooling coverage | GPU core, video memory, and voltage regulators |
|---|
| Cold plate | T2 copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Black aluminum, passive |
|---|
| Ports | G1/4 inlet and outlet |
|---|
| Lighting | 5V 3-pin addressable RGB (Bykski RBW) |
|---|
| Block (L × W × T) | 229.87 × 155.74 × 26.17 mm |
|---|
| Backplate (L × W × T) | 229.87 × 125.70 × 6.00 mm |
|---|
| Cold plate length | 154.72 mm |
|---|
| Microchannels | 0.3 mm |
|---|
Bykski’s dimension drawing in millimeters. Water block above, backplate below.
Which Version Do I Need?
Look up the full ASUS model name on your card label, including any EVO or ROG Strix designation.
Bykski N-AS4070TITUF-X-V2THIS PAGE
Choose this block if your ASUS TUF Gaming or original Dual model and PCB match the compatibility list above.
For an ASUS Dual GeForce RTX 4070 SUPER EVO 12GB, check the exact card model and PCB against this block’s compatibility list.
Check this block’s compatibility list if your card is a ROG Strix RTX 4070 or RTX 4070 SUPER.
What's in the Box
1 × full-cover GPU water block1 × black aluminum backplate2 × G1/4 stop plugs1 × 5V ARGB light stripThermal padsMounting hardware set
The lighting-controller option adds one controller to the same black-backplate kit.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Check the ASUS model number and PCB layout before removing the stock cooler. Clean off the old thermal material.
2Bykski’s installation diagram for this model specifies 1.5 mm pads. Cut them to fit the memory and voltage regulator contact areas shown for your PCB. Apply your own thermal paste to the GPU die.
3Align the block and backplate with the PCB and secure them with the mounting hardware. Tighten the spring screws evenly. Stop if the mounting holes or contact surfaces fail to line up.
4Follow the inlet and outlet markings on the block. Connect the loop with G1/4 fittings and seal the unused openings with the stop plugs.
5Leak-test the loop with the graphics card unpowered. Use a compatible Bykski 5V 3-pin ARGB adapter cable for motherboard sync or a compatible controller for independent lighting. Keep the strip off 12V RGB headers.
You also need a pump, radiator, G1/4 loop fittings, tubing, and coolant.
Bykski’s assembly diagram. 1 water block · 2 thermal pads · 3 your card’s PCB · 4 mounting washers · 5 spring screws · 6 backplate · 7 backplate screws.
FAQ
Which ASUS TUF RTX 4070 Ti SUPER cards fit?
Bykski lists the TUF Gaming 16GB model and the BTF White OC Edition 16GB. Match your card’s full model number and PCB to the list above.
Will this fit the ASUS Dual RTX 4070 SUPER EVO?
For the Dual RTX 4070 SUPER EVO, check your exact card model and PCB against the N-AS4070SDUALEVO-X compatibility list. This V2 block lists the original Dual model DUAL-RTX4070S-12G.
Which fittings should I use?
Use G1/4 fittings that match your loop tubing. Seal the unused terminal openings with the included stop plugs.
How do I run the lighting without motherboard sync?
Select the optional lighting controller for independent control of the 5V ARGB strip.
What thickness are the thermal pads?
Bykski’s installation diagram for this model specifies 1.5 mm pads. Fit them to the designated memory and power delivery contact areas for your PCB.
Notes- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.