RX 6800 XT / RX 6900 XT Water Block — Bykski A-RX6900XT-X for AMD Reference PCBs

Bykski · A-RX6900XT-X

Full-cover water block for AMD Radeon RX 6800 XT and 6900 XT

The Bykski A-RX6900XT-X replaces the stock cooler on supported cards such as the AMD Radeon RX 6800 XT with a reference PCB. It cools the GPU core, memory, and power delivery components in a custom liquid cooling loop. This version includes a black backplate and 5V addressable RGB lighting.

Fits
Listed Radeon PCB layouts
Ports
G1/4
Lighting
5V 3-pin ARGB
Backplate
Included

Compatibility

Match your card to one of these PCB layouts.

  • ✓AMD Radeon RX 6800 — AMD reference PCB
  • ✓AMD Radeon RX 6800 XT — AMD reference PCB
  • ✓AMD Radeon RX 6900 XT — AMD reference PCB
  • ✓Yeston Radeon RX 6800 XT — RX 6800 PCB layout
  • ✓Lenovo Radeon RX 6800 XT — RX 6800 XT PCB layout

Before ordering, verify your exact card model and compare the entire PCB layout. Cards with the same GPU name can use different boards.

AMD Radeon RX 6900 XT reference PCB shown.

Key Specifications

ModelA-RX6900XT-X
Cold plateCopper
TopClear acrylic
Port threadG1/4
Lighting5V 3-pin addressable RGB (RBW)
BackplateBlack, outside the coolant path
Block (L × W × T)262.70 × 135.71 × 22.99 mm
Backplate (L × W × T)263.73 × 105.08 × 3.00 mm

What's in the Box

1 × full-cover GPU water block1 × black backplate2 × G1/4 stop plugs1 × thermal pad setMounting hardware5V ARGB light strip

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Remove the stock cooler and clean off the old thermal paste and pad residue.
2
Place thermal pads as specified for your PCB. Apply a thin layer of your own thermal paste to the GPU die.
3
Align the water block and backplate with the board and secure them with the mounting hardware.
4
Connect the block to your loop with G1/4 fittings and close unused ports with the stop plugs.
5
Leak-test the loop before powering the graphics card.

For the rest of the loop, you need a pump, reservoir, radiator, G1/4 fittings, tubing, and coolant.

FAQ

Does this come with everything I need for water cooling?

The box includes the water block, backplate, and mounting parts. You’ll need the other custom loop components listed above.

Can I connect the lighting to a 12V RGB header?

Use a compatible 5V 3-pin ARGB connection. A 12V 4-pin RGB header can damage the lighting.

Will it fit every Radeon RX 6800 XT?

Check the exact PCB before ordering. Fit is confirmed for the AMD reference board and the specific Yeston and Lenovo layouts listed above.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.