Granzon G10 Open-Frame Water Cooling Case for ATX, Micro-ATX and Mini-ITX | Bykski

Granzon · G10

Open-frame PC case for custom liquid cooling

The Granzon G10 is an open-frame PC case with a clear acrylic distribution plate that routes coolant between loop components. It fits standard ATX motherboards and can stand on a freestanding base. The case-only configuration leaves the pump and other cooling hardware for you to choose.

Fits
ATX, Micro-ATX, Mini-ITX
Radiator mount
1 × 360 mm
Desk clamp fit
5–50 mm thick
Configuration
Case only

Compatibility

Supported motherboard formats

  • ✓Mini-ITX (170 × 170 mm)
  • ✓Micro-ATX (244 × 244 mm)
  • ✓ATX (305 × 244 mm)

The side bracket has space for one 360 mm radiator with three 120 mm fans.

Design Highlights

The distribution plate forms the chassis

The clear acrylic plate is part of the frame. Its channels connect the components in your custom loop, and the open sides keep the motherboard and tubing in view.

Manufacturer’s desk-mount example with separately sourced hardware and cooling parts.

Freestanding or desk-mounted

Use the base for a freestanding build. Desk-edge mounting requires a clamp module and a 5–50 mm thick desktop.

Cable routing through the upright

Run cables down the channel inside the upright post. The post also houses the case’s green-switch power button.

Key Specifications

ModelGranzon G10
Case typeOpen-frame chassis for custom liquid cooling
Distribution plateIntegrated clear Mitsubishi acrylic
Chassis size (H × W × D)545 × 340 × 275 mm
Chassis net weight7.0 kg
Radiator mount1 × 360 mm (3 × 120 mm fans)
Drive mounts2 × SSD and 1 × HDD
Pump mountDDC-style pump, sold separately
Desk clamp fit5–50 mm desktop thickness

Manufacturer’s dimensions in millimeters, shown with the freestanding base.

Which Version Do I Need?

Granzon G10THIS PAGE
Choose the G10 for an open-frame build with one 360 mm radiator.
Choose the G20 if you need a 305 × 280 mm E-ATX board or up to three 360 mm radiators that are 30 mm thick.
Choose the B-CEC-X for a frame that can sit upright or lie flat and supports two 360 mm radiators.

What's in the Box

1 × Granzon G10 chassis with integrated distribution plate

The DDC pump, tubing, fittings, and the PC hardware and cooling parts shown in the build examples are sold separately.

Installation & Use

1
For a freestanding setup, fasten the upright to the base. If you have the desk-clamp module, fasten the upright to it, fit the clamp over the desk edge, and tighten its screws.
2
Secure the motherboard at the matching mounting points. Fit the power supply, graphics card, and any drives to their designated mounts.
3
Seat the seal in the DDC pump’s groove and tighten the pump screws evenly in a diagonal pattern. Align the radiator and fan screw holes before securing them to the side bracket.
4
Connect the distribution plate, radiator, and water blocks with tubing and fittings. Fill the loop and check for leaks with only the pump powered.

Complete the build with your own PC hardware, DDC pump, radiator, fans, water blocks, tubing, fittings, and coolant. The alternate vertical GPU bracket and the side-fan bracket are separate accessories.

FAQ

Does the G10 come with a pump or a cooling kit?

The package contains one chassis with the integrated distribution plate. Buy the DDC pump and other loop components separately.

Does it fit a Micro-ATX motherboard?

Yes. It fits 244 × 244 mm Micro-ATX boards as well as 170 × 170 mm Mini-ITX and 305 × 244 mm ATX boards.

What radiator fits the G10?

The side bracket takes one 360 mm radiator with three 120 mm fans.

How thick can my desk be for clamp mounting?

The desk-clamp module fits a 5–50 mm thick desktop. Confirm whether the module comes with the case before ordering.

Notes
  • Due to the special size of the product, if you are interested in this product, please contact the seller.
  • If you need water cooling kit, please contact us
  • Some secondary pictures show hardware / cooling components to show visual possibilities and are NOT included.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.