Description
This Bykski hard tube bending kit helps you shape acrylic or PETG tubing for a custom PC water-cooling loop. The bending cord supports the tube from the inside while the mold shapes the bend. Choose a kit that matches both the inner and outer diameters of your tubing, then select the cutting and heating tools you need.
Match the kit to both measurements of your acrylic or PETG tube.
The mold fits around the tube’s outer diameter. The bending cord goes inside, so check the inner diameter before ordering.
| Tube materials | Acrylic (PMMA) and PETG rigid tubing |
|---|---|
| Tube ID × OD | 8 × 12 mm / 10 × 14 mm / 12 × 16 mm |
| Bending cord diameter | Approx. 7.5 mm / 9.5 mm / 11.5 mm, respectively |
| Mold angles | 45°, 90°, and 180° in the selected tube size |
| Cutting options | Hand saw for acrylic, cutter for PETG, or no cutting tool |
| Heat gun | Optional |
The molds and cord match the size you select. Add one cutting tool and a heat gun through the options if you need them.
Have a heat gun and the appropriate cutting tool on hand if you leave them out of your kit.
Yes. Choose the size that matches your tube’s inner and outer diameters, then select the hand saw for acrylic or the cutter for PETG.
Choose the 12 × 16 mm option if your tube measures 12 mm inside and 16 mm outside. That option comes with an approximately 11.5 mm bending cord.
A heat gun is included when you select Heat gun under Extra Tool.