Description
The Bykski I-GNA770TF-SR is a GPU water block with a backplate for a matching GUNNIR Intel Arc A770 16GB board. It replaces the original cooler so the card can run in a custom liquid cooling loop. The block transfers heat to the coolant, and the loop’s radiator releases that heat to the air.
Bykski names this card in its compatibility artwork.
Confirm your exact card model and PCB layout before ordering.
The underside has a raised center and surrounding contact surfaces. Check how these line up with the PCB before placing thermal pads.
The fittings connect at the end of the block. Leave room for the fittings and tubing, and follow the inlet and outlet marks on the block when you connect it.
| Bykski model | I-GNA770TF-SR |
|---|---|
| Cooling type | Custom-loop GPU water block |
| Water block (L × W × T) | 274.28 × 93.37 × 16.00 mm |
| Backplate (L × W × T) | 261.18 × 93.37 × 3.81 mm |
| Port location | At the end of the block |
Arc A770 cards come in several board versions. Use the manufacturer label to identify your card, then verify its PCB layout before picking a cooler.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
You also need a pump, reservoir, radiator with fans, compatible fittings, tubing, and coolant.
Yes. You’ll need a pump and the rest of your custom loop to circulate coolant through the block.
Start with the full model on the card label and confirm it’s a GUNNIR Arc A770 16GB. Verify the PCB layout for the block before ordering.
Use the block and backplate dimensions to check clearance. Allow extra room for the fittings and tubing, and make sure the case has a mount for your radiator.