Description
The Bykski B-NVME-SL is a water block for an M.2 2280 NVMe SSD. Its copper cold plate transfers heat from the drive into a custom liquid cooling loop. You can see the coolant channel through the clear acrylic top. Two G1/4 ports connect the block to your loop.
For M.2 2280 NVMe SSDs
Before ordering, check your motherboard’s M.2 slot and mounting point. Allow space above the block for the fittings and tubing.
The coolant channel is visible through the acrylic. Both fittings attach from above.
A thermal pad sits between the SSD and the cold plate to pass heat into the block. The separate bottom bracket holds the drive in place.
| Model (SKU) | B-NVME-SL |
|---|---|
| SSD form factor | M.2 2280 NVMe |
| Top | Clear acrylic |
| Cold plate | Copper |
| Ports | 2 × G1/4 |
| Block (L × W × H) | 72 × 24 × 24 mm |
You’ll need a compatible SSD and a custom loop with a pump, radiator, coolant, G1/4 fittings, and matching tubing.
It is for the M.2 2280 form factor. Check that your motherboard has a compatible M.2 slot and mounting point.
Both ports take G1/4 fittings. Match the tubing to the fittings you use.
It needs a custom liquid cooling loop with a pump, radiator, tubing, fittings, and coolant.
Yes. The block comes with the bottom bracket and mounting screws.