M.2 NVMe SSD Water Block for 2280 Drives – Bykski B-NVME-SL

Bykski · B-NVME-SL

Water-cool your M.2 NVMe SSD in a custom loop

The Bykski B-NVME-SL is a water block for an M.2 2280 NVMe SSD. Its copper cold plate transfers heat from the drive into a custom liquid cooling loop. You can see the coolant channel through the clear acrylic top. Two G1/4 ports connect the block to your loop.

Fits
M.2 2280 NVMe SSD
Cold plate
Copper
Ports
2 × G1/4
Block size
72 × 24 × 24 mm

Compatibility

For M.2 2280 NVMe SSDs

Before ordering, check your motherboard’s M.2 slot and mounting point. Allow space above the block for the fittings and tubing.

Design Highlights

Clear top with two G1/4 ports

The coolant channel is visible through the acrylic. Both fittings attach from above.

Copper contact plate

A thermal pad sits between the SSD and the cold plate to pass heat into the block. The separate bottom bracket holds the drive in place.

Key Specifications

Model (SKU)B-NVME-SL
SSD form factorM.2 2280 NVMe
TopClear acrylic
Cold plateCopper
Ports2 × G1/4
Block (L × W × H)72 × 24 × 24 mm

Block dimensions in millimeters.

Which Version Do I Need?

Bykski B-NVME-SLTHIS PAGE
Choose this water block to connect your M.2 SSD to a custom liquid cooling loop.
Choose this passive M.2 SSD heatsink for a build without an SSD liquid cooling loop.

What's in the Box

1 × M.2 SSD water block with bottom bracketMounting screws

Installation & Use

1
Place thermal pads above and below the SSD as shown in the assembly diagram.
2
Set the water block over the SSD and fit the black bottom bracket underneath. Secure the assembly with the side screws.
3
Insert the assembled SSD into the motherboard’s M.2 slot and secure it at the M.2 mounting point.
4
Connect both G1/4 ports to the loop. Leak-test the loop before powering on the system.

You’ll need a compatible SSD and a custom loop with a pump, radiator, coolant, G1/4 fittings, and matching tubing.

Assembly from top to bottom. Water block, thermal pad, SSD, thermal pad, then bottom bracket.

FAQ

What size M.2 NVMe SSD fits the B-NVME-SL?

It is for the M.2 2280 form factor. Check that your motherboard has a compatible M.2 slot and mounting point.

What fittings do the ports use?

Both ports take G1/4 fittings. Match the tubing to the fittings you use.

Can I use this water block on its own?

It needs a custom liquid cooling loop with a pump, radiator, tubing, fittings, and coolant.

Does the block come with mounting hardware?

Yes. The block comes with the bottom bracket and mounting screws.