4-Pin Molex Cable with 12V DC Jack Input for Water Pumps and Fans, Bykski B-DC-D4P-X

Bykski · B-DC-D4P-X

12V DC power adapter cable for a water pump or fan

The Bykski B-DC-D4P-X connects an external 12V DC supply to a compatible water-cooling pump or case fan. The power supply plugs into the barrel jack, and the pump or fan connects to its matching power lead. Use this cable to run the pump while the rest of the PC stays off for filling or leak testing.

Fits
Matching male DC barrel plug
Supply
12V DC
Main lead
280 mm end to end

Use With

  • ✓External 12V DC supply with a matching male barrel plug
  • ✓12V water pump with a matching 4-pin peripheral Molex power plug
  • ✓12V case fan with a matching small 4-pin fan power plug

Before buying a power supply, confirm the barrel plug dimensions and center-contact polarity required by this cable. Check the pump or fan's power connector, voltage, and current requirements before connecting it.

Design Highlights

External DC input

The female barrel jack takes power from an external 12V DC supply, so you can fill your loop with the PC off.

Separate pump and fan power connectors

Use the wider 4-pin peripheral Molex connector for a matching pump. The smaller connector sits on a separate two-wire fan power lead.

Key Specifications

ModelB-DC-D4P-X
DC inputFemale DC barrel jack
External supply12V DC
Pump connector4-pin peripheral Molex
Fan connectorSmall 4-pin fan power connector, two wires
Overall length280 mm nominal, barrel jack to Molex
ColorBlack

Measurements in millimeters.

What's in the Box

1 × B-DC-D4P-X adapter cable

Installation & Use

1
Keep the external 12V DC supply unplugged. Match the cable's Molex connector to the pump's power plug or use the smaller branch for a compatible fan.
2
Insert the external supply's barrel plug into the adapter cable's round jack.
3
For a water pump, prime it according to its instructions before switching on the supply. Keep the rest of the PC off while checking the loop for leaks.

You also need a matching external 12V DC supply.

Connection example. The illustrated wall adapter is sold separately.

FAQ

Which end of the 4-pin Molex adapter takes power?

The external supply connects to the round DC jack. The Molex end connects to the water pump's power plug.

What does the smaller 4-pin connector do?

It supplies power to a matching 12V fan through a two-wire lead.

Which parts come in the box?

You get one adapter cable. The external 12V power supply is sold separately.

Can I fill the loop with the PC off?

Yes. An external 12V supply can run a compatible water pump independently while you fill the loop and check for leaks.

Notes
  • 1. This product is only an adapter (conversion cable), without any DC power plug.