Bykski · TC Multi-GPU Bridges
One coolant bridge for two or four GPU water blocks
This Bykski acrylic bridge connects two or four compatible RTX 3090 GPU water blocks with Bykski TC active backplates in a custom liquid cooling loop. The bridge replaces the blocks’ original terminals so coolant can pass between them without separate tubing runs. Choose the bridge by the exact water block model and measure the motherboard slot spacing before ordering.
Fits
Select Bykski RTX 3090 TC blocks
Fits These Bykski Water Blocks
Match the exact water block part number, including its revision suffix.
- ✓B-L2-2WAY-TC (2 blocks) or B-L3-4WAY-TC (4 blocks)
- N-AS3090STRIX-TC-V2
- N-AS3090TUF-TC
- N-IG3090VXOC-TC
- N-MS3090TRIO-TC
- N-RTX3090FE-TC
- N-PT3090GR-TC
- N-GY3090CL-TC
- ✓B-L3-2WAY-TC (2 blocks) or B-L4-4WAY-TC (4 blocks)
- N-RTX3090H-TC-V2
- N-GV3090GMOC-TC
- N-GV3090AORUS-TC
- N-GV3090AORUSXE-TC
- N-ST3090TQ-TC
- N-ST3090PGF-TC
- N-ST3090XG-TC
- N-EV3090FTW3-TC
- N-GY3090GAMER-TC
- N-IG3090UL-TC
- N-IG3090ZF-TC
- N-ICH3090-TC
- N-MS3090VES-TC
Not compatible:
- ✗N-GY3090HOF-TC with the standard B-L3-2WAY-TC or B-L4-4WAY-TC.
Measure the spacing between the PCIe slots you plan to use. If it exceeds 40 mm, contact customer service before ordering to check whether a custom bridge is needed.
Confirm the specific combination if you plan to mix water block models.
Design Highlights
Visible coolant channels
The clear acrylic body lets you see the coolant channels. The bridge connects to your loop through G1/4 ports.
Bykski’s four-block installation example.
Direct connection between blocks
The bridge mounts in place of the original terminals and saves the space that tubing would take between the cards.
Key Specifications
| Material and finish | Clear machined acrylic (PMMA) |
|---|
| Loop fitting thread | G1/4 |
|---|
| PCIe slot spacing | 40 mm nominal. Measure the slots you will use. |
|---|
| B-L2-2WAY-TC | 2 blocks · 87.34 × 79 × 24 mm (L × W × T) |
|---|
| B-L3-2WAY-TC | 2 blocks · 90.34 × 79 × 24 mm (L × W × T) |
|---|
| B-L3-4WAY-TC | 4 blocks · 171.62 × 79 × 24 mm (L × W × T) |
|---|
| B-L4-4WAY-TC | 4 blocks · 168.62 × 79 × 24 mm (L × W × T) |
|---|
Bykski’s B-L4-4WAY-TC drawing. Dimensions are in millimeters.
Which Version Do I Need?
Use the fit list to find the matching bridge pair, then choose the part number for your block count.
Bykski TC multi-GPU bridgeTHIS PAGE
Choose one of the two- or four-block versions on this page for the TC water block models listed above.
Compare this separate three-block bridge if you have three water blocks, and verify its fit for your build.
Compare this 90-degree rotary terminal if you want to change the tubing direction on a single water block.
What's in the Box
1 × acrylic bridge in the selected version
Installation & Use
1Confirm the water block part numbers, block count, and PCIe slot spacing. Remove the original terminal from each water block.
2Seat the sealing rings in the grooves on the underside of the bridge.
3Align the bridge with the water blocks and tighten the mounting screws in sequence.
4Connect the loop with G1/4 fittings. Seal unused ports with G1/4 stop plugs.
5Leak-test the assembled loop with the graphics cards unpowered. Bykski recommends a 24-hour test.
Have the matching TC water blocks and backplates, the correct bridge seals and screws, tubing with matching G1/4 fittings, and stop plugs ready.
Bykski’s B-L4-4WAY-TC installation illustration shows how the seals sit between the bridge and the blocks.
FAQ
How do I pick a version for my RTX 3090 build?
Find your exact Bykski water block part number in the fit list, then select the bridge for two or four blocks. Measure the PCIe slots you plan to use.
Do I keep the original water block terminals?
Remove the original terminals before fitting the bridge. The bridge takes their place across the connected blocks.
Can I connect hard or soft tubing?
Either works at the loop connections. Use G1/4 fittings sized for the tubing you have.
How do I seal unused ports?
Use G1/4 stop plugs to seal any unused ports before leak-testing the loop.
Notes- 1. The GPU blocks and graphics cards in the detailed picture are only for reference and product function display.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.