Bykski · N-AS4090STRIX-X-V2
Full-cover water block for select ASUS RTX 4090 cards
The Bykski N-AS4090STRIX-X-V2 replaces the stock cooler on the ASUS ROG Strix and TUF Gaming GeForce RTX 4090 cards listed below for use in a custom liquid cooling loop. Its nickel-plated copper cold plate cools the GPU core, memory, and voltage regulators. The block comes with a black aluminum backplate.
Fits
Select ASUS RTX 4090 cards
Cold plate
Nickel-plated copper
Compatibility
Bykski lists these ASUS graphics card layouts.
- ✓ROG Strix GeForce RTX 4090 24GB
ROG-STRIX-RTX4090-24G-GAMING - ✓TUF Gaming GeForce RTX 4090 24GB
TUF-RTX4090-24G-GAMING - ✓ROG Strix GeForce RTX 4090 24GB OC
ROG-STRIX-RTX4090-O24G-GAMING - ✓ROG Strix GeForce RTX 4090 24GB White OC
ROG-STRIX-RTX4090-O24G-WHITE - ✓ROG Strix GeForce RTX 4090 D 24GB
ROG-STRIX-RTX4090D-24G-GAMING
Not compatible:
- ✗TUF Gaming GeForce RTX 4090 24GB OG
- ✗ROG Strix LC GeForce RTX 4090 24GB
- ✗ROG Strix LC GeForce RTX 4090 24GB OC
Check your exact card model and compare its full PCB layout with the manufacturer's layout before ordering.
Example card shown with its stock cooler. Verify the PCB separately.
Key Specifications
| Model | N-AS4090STRIX-X-V2 |
|---|
| Cold plate | Nickel-plated copper |
|---|
| Top | Clear acrylic |
|---|
| Backplate | Black aluminum |
|---|
| Inlet and outlet threads | G1/4 |
|---|
| Lighting | 5V addressable RGB (RBW) |
|---|
Which Version Do I Need?
Check your PCB against the listing for the version you choose.
Bykski N-AS4090STRIX-X-V2THIS PAGE
Choose V2 for a clear acrylic top, 5V ARGB lighting, and a black backplate.
Choose V3 for a POM build with a copper cold plate, a backplate, and no lighting.
What's in the Box
1 × full-cover GPU water block1 × black backplate1 × mounting hardware set1 × set of thermal pads2 × G1/4 stop plugs1 × 5V ARGB light
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
1Remove the stock cooler and clean the old thermal compound from the GPU.
2Apply thermal paste to the GPU die and place thermal pads at the memory and VRM contact points shown in Bykski's installation diagram.
3Align the block and backplate with the PCB and secure them using the mounting hardware.
4Connect the tubing with G1/4 fittings and seal the unused ports with stop plugs.
5Leak-test the loop before powering the graphics card.
You also need a pump, radiator, fittings, tubing, and coolant.
FAQ
Does the block include a backplate?
Yes. It comes with one black aluminum backplate that sits outside the coolant path.
Does it fit the ROG Strix RTX 4090 White OC?
Yes, for the PCB listed as ROG-STRIX-RTX4090-O24G-WHITE. The included backplate is black.
Can I use a 12V RGB header?
Use a compatible 5V RBW controller or an adapter to a 3-pin 5V ARGB header. A 12V RGB header can damage the light.
Notes- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.