Tesla V100 SXM2 Water Block with Backplate - Bykski N-TESLA-V100SXM2-32G-SR

$121.13 piece
items available
View Details
Bykski · N-TESLA-V100SXM2-32G-SR

Full-cover water block for NVIDIA Tesla SXM2 modules

The Bykski N-TESLA-V100SXM2-32G-SR replaces the stock cooler on supported NVIDIA Tesla V100 and P100 SXM2 modules. Its nickel-plated copper cold plate transfers heat from the GPU package and power delivery components to a custom liquid cooling loop. The block connects through two G1/4 ports and comes with a backplate.

Fits
Select NVIDIA Tesla V100 and P100 SXM2 modules
Cold plate
Nickel-plated T2 copper
Ports
2 × G1/4
Dimensions
140 × 79.4 × 27 mm

Compatibility

Match the SXM2 module and its PCB layout.

  • ✓NVIDIA Tesla V100 SXM2 16GB
  • ✓NVIDIA Tesla V100 SXM2 32GB
  • ✓NVIDIA Tesla P100 SXM2 16GB

Not compatible:

  • ✗NVIDIA Tesla V100 PCIe cards
  • ✗NVIDIA Tesla P100 PCIe cards

Before ordering, compare your exact module’s PCB and mounting-hole positions with the reference layout.

Bykski assembly diagram. ① Water block · ② Thermal pads · ③ SXM2 PCB.

Design Highlights

Copper cold plate with jet microchannels

The nickel-plated T2 copper cold plate uses 0.3 mm jet microchannels to expose more surface area to the coolant.

Two ports on the face of the block

Both ports take G1/4 fittings. Match the fittings to your tubing size and use the inlet shown in the flow diagram.

Bykski coolant flow illustration.

How to identify the inlet

With the Bykski badge on the left as pictured, the blue circle marks the upper port. Connect the incoming coolant line there.

Key Specifications

ModelN-TESLA-V100SXM2-32G-SR
Cold plateNickel-plated T2 copper
Cold plate thickness9.8 mm
Other block material304 stainless steel
FinishGunmetal
Dimensions (L × W × H)140 × 79.4 × 27 mm
Net weight0.88 kg
Port threads2 × G1/4 female
Cooling methodJet impingement
O-ringEPDM
Maximum working pressure4 bar
Working temperature−20°C to 60°C
Bykski-listed fluids for the blockWater, ethylene glycol, propylene glycol, fluorinated fluid, mineral oil

Bykski dimensional drawing. Measurements in millimeters.

Which Version Do I Need?

Check the form factor on your V100 before choosing a block.

Bykski N-TESLA-V100SXM2-32G-SRTHIS PAGE
Choose this block for one of the listed SXM2 modules once you have matched its PCB.
For a Tesla V100 32GB FHHL PCIe card, compare the PCB against the reference on this listing before buying.

What's in the Box

1 × full-cover GPU water block1 × backplateMounting hardwareThermal pads

G1/4 stop plugs are not included. If you need to cap an unused port, supply your own G1/4 stop plug.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off and unplug the system. Follow your system’s service manual to remove the SXM2 module and its stock cooler. Clean off the old thermal materials before installing the water block.
2
Cut 1.5 mm thermal pads to fit the two marked contact areas. Apply a thin layer of your own thermal paste to the GPU contact surface.
3
Align the block with the module’s mounting holes and tighten the screws gradually in the 01–04 order marked on the block. Secure the backplate at the corresponding holes.
4
Connect the G1/4 fittings and tubing, using the inlet identified in the flow diagram. Fill the loop and check for leaks before powering the module.

You also need a pump, radiator, G1/4 fittings, matching tubing, and coolant.

Apply paste to the center GPU contact area and pads to the two shaded outer strips.

FAQ

Will this water block fit my Tesla V100 PCIe card?

The fit list is limited to the specified SXM2 modules. For the V100 32GB FHHL PCIe version, use the PCB comparison in the linked FHHL listing above.

Does the same water block fit the P100?

Bykski lists the NVIDIA Tesla P100 SXM2 16GB. Check that its PCB matches the reference layout.

What fittings do I need?

Use G1/4 male fittings sized for your tubing.

What thermal pad thickness does the installation diagram show?

The diagram specifies 1.5 mm pads for the two outer contact areas.

Notes
  • This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
  • The product does NOT include printed instructions. See Compatibility for the assembly diagram and Installation & Use for thermal pad placement.
  • The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
  • This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.