Bykski · CP-PMD3COV-X-CT60-V2
DDC pump and reservoir for custom PC water cooling
The Bykski CP-PMD3COV-X-CT60-V2 combines a DDC pump with a top-mounted reservoir for a custom PC water cooling loop. The reservoir holds coolant for filling and feeds it directly into the pump, which circulates it through the loop. Choose one of four reservoir sizes, or select the CP-PMD3COV-X pump alone if your loop already has a reservoir.
Nominal reservoir size
60, 100, 150, or 200 mm
Lighting options
5 V ARGB or unlit POM
Fit & Connections
Check the fittings and electrical connections for the version you choose.
- ✓G1/4 threaded fittings for the acrylic versions.
- ✓4-pin Molex from the power supply for pump power.
- ✓4-pin PWM header for speed control and RPM feedback.
- ✓5 V 3-pin motherboard ARGB header for the acrylic option’s included lighting adapter cable.
Check the mounting space in your case and allow room for fittings and tubing when choosing a reservoir size.
Design Highlights
Acrylic ARGB combos from shortest to tallest.
Four reservoir sizes
Choose the reservoir size based on the space available above the pump. Leave room to reach the fittings and fill the reservoir after mounting it.
Top return and pump outlet
On the acrylic combo shown here, the loop returns coolant through the reservoir cap and takes it out through the port on the pump top. The finned aluminum housing sits outside the coolant path.
Key Specifications
| Combo model | CP-PMD3COV-X-CT60-V2 |
|---|
| Pump-only model | CP-PMD3COV-X |
|---|
| Pump type | DDC |
|---|
| Nominal reservoir size | 60, 100, 150 or 200 mm |
|---|
| Pump-top options | Clear acrylic with 5 V 3-pin ARGB (RBW), or unlit POM |
|---|
| Acrylic combo construction | PMMA reservoir and black aluminum pump housing |
|---|
| Port thread (acrylic versions) | G1/4 |
|---|
| Pump power | 12 V DC via 4-pin Molex |
|---|
| Speed control and feedback | Separate 4-pin PWM signal connection |
|---|
| Max head (acrylic) | 6 m |
|---|
| Max pump speed (acrylic reservoir combos) | 5,000 RPM |
|---|
| Acrylic pump alone (W × D × H) | 70 × 70 × 63 mm |
|---|
| Acrylic combo footprint (W × D) | 70 × 70 mm |
|---|
| Acrylic combo height | 60 mm reservoir: 115.7 mm total 100 mm reservoir: 155.7 mm total |
|---|
Bykski drawing for the 60 and 100 mm acrylic combos. Measurements are in millimeters.
Which Version Do I Need?
Choose a reservoir size for a combined unit or select Just Pump to use a separate reservoir. Both choices offer an acrylic ARGB or unlit POM pump top.
Bykski DDC comboTHIS PAGE
Choose this combo for a DDC pump with a reservoir mounted directly above it.
Choose this separate combo if you are looking for a Bykski PARX pump with a reservoir.
What's in the Box
1 × DDC pump1 × reservoir in the selected size (combo only)Reservoir mounting bracket (combo only)5 V 3-pin motherboard ARGB adapter cable (acrylic ARGB options only)
The acrylic combo includes the reservoir cap.
Installation & Use
1Check clearance, including space for tubing and access to the cap. Secure the unit at a suitable mounting point. For a combo, mount the reservoir with the included bracket. Bykski’s arch bracket is sold separately.
2Match your fittings to the ports and tubing. Use G1/4 fittings for the acrylic versions. On the acrylic combo, route the return line to the reservoir cap and connect the outgoing line to the pump top. With Just Pump, connect a separate reservoir directly to the pump inlet.
3Connect the pump’s Molex lead to the power supply and the PWM lead to a PWM header. If you chose acrylic ARGB, use the included adapter cable to connect the lighting lead to a 5 V 3-pin ARGB header on your motherboard.
4Fill the reservoir and let coolant reach the pump before switching it on. Keep the pump supplied with coolant as you top up the reservoir. Leak-test with only the pump powered before starting the PC.
You also need loop fittings, tubing, coolant, a radiator with fans, and water blocks for the components you’re cooling. For Just Pump, supply a separate reservoir.
Bykski’s example shows how the L-shaped brackets fasten to a case mounting panel.
FAQ
Which pump does this combo use?
It uses the Bykski CP-PMD3COV-X DDC pump.
What does the 200 mm option measure?
200 mm is the nominal reservoir size. Allow additional space for the pump, fittings and tubing.
Can I use the pump with my existing separate reservoir?
Yes. Select Just Pump and route the reservoir feed directly to the pump inlet.
Does the PWM connector power the pump?
Use the 4-pin Molex lead for pump power. The separate 4-pin PWM lead controls speed and reports RPM.
Which option has ARGB lighting?
The clear acrylic option uses 5 V 3-pin ARGB (RBW) and includes an adapter cable for the motherboard’s 5 V 3-pin ARGB header. Choose POM for an unlit pump top.
Notes- Not responsible for any hardware damage. Use at your own risk.
- Brand manufacturers reserves right to alter block design to expand compatibility.
- Delivered item may not 100% match pictured item.
- In case of upgrading to the appearance and structure, no further notice, the real object shall prevail.